lkml.org 
[lkml]   [2016]   [Jul]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 09/10] Documentation: devicetree: Add dts description for nuc900
From
Date


On 2016年07月11日 06:17, Arnd Bergmann wrote:
> On Sunday, July 10, 2016 3:42:21 PM CEST Wan Zongshun wrote:
>> +
>> +Required properties:
>> +- compatible : Should be "nuvoton,nuc970-tmr"
>> +- reg : Address and length of the register set
>> +- clocks : Reference on the timer input clock
>> +- interrupts : Reference to the timer interrupt
>> +
>> +Example:
>> +
>> +tmr@0xb8001000 {
>
> The name should be "timer", not "tmr", and the address should
> not contain a leading "0x".

Ok, so all dts addresses has no need contain a leading "0x"?

>
>> + compatible = "nuvoton,nuc970-tmr";
>> + reg = <0xb8001000 0x1000>;
>> + interrupts = <16>;
>> + clocks = <&clks TIMER0_GATE>,
>> + <&clks TIMER1_GATE>;
>> + clock-names = "timer0", "timer1";
>> +};
>
> The clocks/clock-names description does not match the example:
> you only define a single clock in the required properties, but
> have two separate inputs in the example. Please fix one or the
> other.

Two clocks are necessary, so I only need modify this description like?

Required properties:
clocks : Reference on the timer input clock, This list should be 2
clocks, the order is timer0 , timer1.

Is it ok?

>
> Arnd
>
>

\
 
 \ /
  Last update: 2016-07-11 05:01    [W:0.076 / U:1.456 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site