Messages in this thread | | | From | Roger Quadros <> | Subject | [PATCH v7 0/4] usb: dwc3: dual-role support | Date | Fri, 10 Jun 2016 16:17:26 +0300 |
| |
Hi,
This series adds dual role support to dwc3 controller driver. Series depends on the OTG/dual-role framework [1].
[1] - http://thread.gmane.org/gmane.linux.usb.general/143568
Patches are based on Felipe's balbi/usb.git testing/next
Changelog:
v7: - rebased to v4.7-rc1 + balbi/usb.git testing/next - cleaned up otg irq resource code
v6: - use just otg irq to get otg events and don't depend on extcon at all. - follow OTG flow in TRM strictly. - use tracepoints instead of dev_dbg(). - match IRQ flags in dwc3_omap and core.c for shared otg interrupt.
v5: Internal revision. Not sent to mailing list.
v4: first version that was reviewed.
cheers, -roger
Roger Quadros (4): usb: dwc3: core.h: add some register definitions usb: dwc3: add dual-role support ARM: dts: dra7*-evm: Enable dual-role for usb1 ARM: dts: am43xx: Enable dual-role on USB1
arch/arm/boot/dts/am437x-gp-evm.dts | 5 +- arch/arm/boot/dts/am437x-sk-evm.dts | 5 +- arch/arm/boot/dts/am43x-epos-evm.dts | 5 +- arch/arm/boot/dts/dra7-evm.dts | 5 +- arch/arm/boot/dts/dra72-evm-common.dtsi | 5 +- drivers/usb/dwc3/core.c | 546 +++++++++++++++++++++++++++++++- drivers/usb/dwc3/core.h | 114 ++++++- drivers/usb/dwc3/gadget.c | 6 +- drivers/usb/dwc3/host.c | 2 + 9 files changed, 677 insertions(+), 16 deletions(-)
-- 2.7.4
| |