lkml.org 
[lkml]   [2016]   [Apr]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 1/2] dt/bindings/usb: Add bindings for PIC32 MUSB driver.
From
Date
On 4/7/2016 3:32 PM, Purna Chandra Mandal wrote:

> Document devicetree binding for the USB controller
> and USB Phy found on Microchip PIC32 class devices.
>
> Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
>
> ---
>
> Changes in v2: None
>
> .../bindings/usb/microchip,pic32-musb.txt | 67 ++++++++++++++++++++++
> 1 file changed, 67 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/usb/microchip,pic32-musb.txt
>
> diff --git a/Documentation/devicetree/bindings/usb/microchip,pic32-musb.txt b/Documentation/devicetree/bindings/usb/microchip,pic32-musb.txt
> new file mode 100644
> index 0000000..e1cec9d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/microchip,pic32-musb.txt
> @@ -0,0 +1,67 @@
> +Microchip PIC32 MUSB DRC/OTG controller
> +-------------------------------------------
> +
> +Required properties:
> + - compatible : should be "microchip,pic32mzda-usb".
> + - reg : offset and length of "MUSB Core Registers" and
> + "USB Clock & Reset Registers".
> + - reg-names : should be "mc", and "usbcr" in order
> + - clocks : clock specifier for the musb controller clock
> + - clock-names : should be "usb_clk"
> + - interrupts : interrupt number for MUSB Core General interrupt
> + and DMA interrupt
> + - interrupt-names : must be "mc" and "dma" in order.
> + - phys : phy specifier for the otg phy.
> + - dr_mode : should be one of "host", "peripheral" or "otg".
> + - mentor,multipoint: Should be "1" indicating the musb controller supports
> + multipoint. This is MUSB configuration-specific setting.
> + - mentor,num-eps : Specifies the number of endpoints. This is also a
> + MUSB configuration-specific setting. Should be set to "8".
> + - mentor,ram-bits : Specifies the ram address size. Should be set to "11".
> + - mentor,power : Should be "500". This signifies the controller can supply
> + up to 500mA when operating in host mode.
> + - phys : phandle of the USB phy.

Just noticed that "phys" is described twice. :-/

MBR, Sergei

\
 
 \ /
  Last update: 2016-04-07 15:41    [W:0.116 / U:0.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site