lkml.org 
[lkml]   [2016]   [Apr]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v6 0/7] KVM PCIe/MSI passthrough on ARM/ARM64: kernel part 1/3: iommu changes
Date
This series introduces the dma-reserved-iommu api used to:
- create/destroy an iova domain dedicated to reserved iova bindings
- map/unmap physical addresses onto reserved IOVAs.
- unmap and destroy all IOVA reserved bindings

Currently reserved IOVAs are meant to map MSI physical doorbells. A single
reserved domain does exit per domain.

Also a new domain attribute is introduced to signal whether the MSI
addresses must be mapped in the IOMMU

VFIO subsystem is supposed to create/destroy the iommu reserved domain.

When the MSI sub-system is about to handle an MSI physical address
that needs to be bound, it uses the dma-reserved_iommu API to map/unmap
the address. Since several drivers are likely to use the same doorbell,
a reference counting must exist on the bindings. An RB-tree indexed by PA
is used.

More details & context can be found at:
http://www.linaro.org/blog/core-dump/kvm-pciemsi-passthrough-armarm64/

Best Regards

Eric

Git: complete series available at
https://git.linaro.org/people/eric.auger/linux.git/shortlog/refs/heads/v4.6-rc1-pcie-passthrough-v6

History:

RFC v5 -> patch v6:
- split to ease the review process
- in dma-reserved-api use a spin lock instead of a mutex (reported by
Jean-Philippe)
- revisit iommu_get_reserved_iova API to pass a size parameter upon
Marc's request
- Consistently use the page order passed when creating the iova domain.
- init reserved_binding_list (reported by Julien)

RFC v4 -> RFC v5:
- take into account Thomas' comments on MSI related patches
- split "msi: IOMMU map the doorbell address when needed"
- increase readability and add comments
- fix style issues
- split "iommu: Add DOMAIN_ATTR_MSI_MAPPING attribute"
- platform ITS now advertises IOMMU_CAP_INTR_REMAP
- fix compilation issue with CONFIG_IOMMU API unset
- arm-smmu-v3 now advertises DOMAIN_ATTR_MSI_MAPPING

RFC v3 -> v4:
- Move doorbell mapping/unmapping in msi.c
- fix ref count issue on set_affinity: in case of a change in the address
the previous address is decremented
- doorbell map/unmap now is done on msi composition. Should allow the use
case for platform MSI controllers
- create dma-reserved-iommu.h/c exposing/implementing a new API dedicated
to reserved IOVA management (looking like dma-iommu glue)
- series reordering to ease the review:
- first part is related to IOMMU
- second related to MSI sub-system
- third related to VFIO (except arm-smmu IOMMU_CAP_INTR_REMAP removal)
- expose the number of requested IOVA pages through VFIO_IOMMU_GET_INFO
[this partially addresses Marc's comments on iommu_get/put_single_reserved
size/alignment problematic - which I did not ignore - but I don't know
how much I can do at the moment]

RFC v2 -> RFC v3:
- should fix wrong handling of some CONFIG combinations:
CONFIG_IOVA, CONFIG_IOMMU_API, CONFIG_PCI_MSI_IRQ_DOMAIN
- fix MSI_FLAG_IRQ_REMAPPING setting in GICv3 ITS (although not tested)

PATCH v1 -> RFC v2:
- reverted to RFC since it looks more reasonable ;-) the code is split
between VFIO, IOMMU, MSI controller and I am not sure I did the right
choices. Also API need to be further discussed.
- iova API usage in arm-smmu.c.
- MSI controller natively programs the MSI addr with either the PA or IOVA.
This is not done anymore in vfio-pci driver as suggested by Alex.
- check irq remapping capability of the group

RFC v1 [2] -> PATCH v1:
- use the existing dma map/unmap ioctl interface with a flag to register a
reserved IOVA range. Use the legacy Rb to store this special vfio_dma.
- a single reserved IOVA contiguous region now is allowed
- use of an RB tree indexed by PA to store allocated reserved slots
- use of a vfio_domain iova_domain to manage iova allocation within the
window provided by the userspace
- vfio alloc_map/unmap_free take a vfio_group handle
- vfio_group handle is cached in vfio_pci_device
- add ref counting to bindings
- user modality enabled at the end of the series


Eric Auger (7):
iommu: Add DOMAIN_ATTR_MSI_MAPPING attribute
iommu/arm-smmu: advertise DOMAIN_ATTR_MSI_MAPPING attribute
iommu: introduce a reserved iova cookie
dma-reserved-iommu: alloc/free_reserved_iova_domain
dma-reserved-iommu: reserved binding rb-tree and helpers
dma-reserved-iommu: iommu_get/put_single_reserved
dma-reserved-iommu: iommu_unmap_reserved

drivers/iommu/Kconfig | 8 +
drivers/iommu/Makefile | 1 +
drivers/iommu/arm-smmu-v3.c | 2 +
drivers/iommu/arm-smmu.c | 2 +
drivers/iommu/dma-reserved-iommu.c | 321 +++++++++++++++++++++++++++++++++++++
drivers/iommu/iommu.c | 2 +
include/linux/dma-reserved-iommu.h | 80 +++++++++
include/linux/iommu.h | 7 +
8 files changed, 423 insertions(+)
create mode 100644 drivers/iommu/dma-reserved-iommu.c
create mode 100644 include/linux/dma-reserved-iommu.h

--
1.9.1

\
 
 \ /
  Last update: 2016-04-04 11:02    [W:0.901 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site