lkml.org 
[lkml]   [2016]   [Apr]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [RESEND PATCH v2 6/7] usb: xhci: plat: add generic PHY support
Date

Hi,

Jisheng Zhang <jszhang@marvell.com> writes:
> Marvell BG4CT SoC needs two phy: one for usb2 and another for usb3. Add
> the calls to retrieve generic PHY to xhci plat in order to support this.
>
> Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
> ---
> drivers/usb/host/xhci-plat.c | 87 ++++++++++++++++++++++++++++++++++++++------
> 1 file changed, 75 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
> index 83669d0..d7f4f3c 100644
> --- a/drivers/usb/host/xhci-plat.c
> +++ b/drivers/usb/host/xhci-plat.c
> @@ -16,6 +16,7 @@
> #include <linux/dma-mapping.h>
> #include <linux/module.h>
> #include <linux/of.h>
> +#include <linux/phy/phy.h>
> #include <linux/platform_device.h>
> #include <linux/slab.h>
> #include <linux/usb/phy.h>
> @@ -134,6 +135,37 @@ static const struct of_device_id usb_xhci_of_match[] = {
> MODULE_DEVICE_TABLE(of, usb_xhci_of_match);
> #endif
>
> +static int xhci_plat_phy_init(struct usb_hcd *hcd)
> +{
> + int ret;
> +
> + if (hcd->phy) {
> + ret = phy_init(hcd->phy);
> + if (ret)
> + return ret;
> +
> + ret = phy_power_on(hcd->phy);
> + if (ret) {
> + phy_exit(hcd->phy);
> + return ret;
> + }
> + } else {
> + ret = usb_phy_init(hcd->usb_phy);
> + }
> +
> + return ret;
> +}
> +
> +static void xhci_plat_phy_exit(struct usb_hcd *hcd)
> +{
> + if (hcd->phy) {
> + phy_power_off(hcd->phy);
> + phy_exit(hcd->phy);
> + } else {
> + usb_phy_shutdown(hcd->usb_phy);
> + }
> +}
> +
> static int xhci_plat_probe(struct platform_device *pdev)
> {
> struct device_node *node = pdev->dev.of_node;
> @@ -145,6 +177,7 @@ static int xhci_plat_probe(struct platform_device *pdev)
> struct usb_hcd *hcd;
> struct clk *clk;
> struct usb_phy *usb_phy;
> + struct phy *phy;

so, one phy driver using USB PHY layer and another using generic PHY
layer ? Why ? I think the first thing your series should do would be to
add proper suport for both APIs with two PHYs and make them all optional
for xhci-plat.

> @@ -232,22 +265,44 @@ static int xhci_plat_probe(struct platform_device *pdev)
> if (HCC_MAX_PSA(xhci->hcc_params) >= 4)
> xhci->shared_hcd->can_do_streams = 1;
>
> + hcd->phy = devm_phy_get(&pdev->dev, "usb2-phy");
> + if (IS_ERR(hcd->phy)) {
> + ret = PTR_ERR(hcd->phy);
> + if (ret == -EPROBE_DEFER)
> + goto put_usb3_hcd;
> + hcd->phy = NULL;
> + }
> +
> + phy = devm_phy_get(&pdev->dev, "usb-phy");
> + if (IS_ERR(phy)) {
> + ret = PTR_ERR(phy);
> + if (ret == -EPROBE_DEFER)
> + goto put_usb3_hcd;
> + phy = NULL;
> + }
> +
> usb_phy = devm_usb_get_phy_by_phandle(&pdev->dev, "usb-phy", 0);
> if (IS_ERR(usb_phy)) {
> ret = PTR_ERR(usb_phy);
> if (ret == -EPROBE_DEFER)
> goto put_usb3_hcd;
> usb_phy = NULL;
> - } else {
> - ret = usb_phy_init(usb_phy);
> - if (ret)
> - goto put_usb3_hcd;
> }
> +
> xhci->shared_hcd->usb_phy = usb_phy;
> + xhci->shared_hcd->phy = phy;
> +
> + ret = xhci_plat_phy_init(hcd);
> + if (ret)
> + goto put_usb3_hcd;
> +
> + ret = xhci_plat_phy_init(xhci->shared_hcd);
> + if (ret)
> + goto disable_usb2_phy;
>
> ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
> if (ret)
> - goto disable_usb_phy;
> + goto disable_usb3_phy;
>
> ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
> if (ret)
> @@ -259,8 +314,11 @@ static int xhci_plat_probe(struct platform_device *pdev)
> dealloc_usb2_hcd:
> usb_remove_hcd(hcd);
>
> -disable_usb_phy:
> - usb_phy_shutdown(usb_phy);
> +disable_usb3_phy:
> + xhci_plat_phy_exit(xhci->shared_hcd);
> +
> +disable_usb2_phy:
> + xhci_plat_phy_exit(hcd);
>
> put_usb3_hcd:
> usb_put_hcd(xhci->shared_hcd);
> @@ -281,11 +339,11 @@ static int xhci_plat_remove(struct platform_device *dev)
> struct clk *clk = xhci->clk;
>
> usb_remove_hcd(xhci->shared_hcd);
> - usb_phy_shutdown(xhci->shared_hcd->usb_phy);
> -
> - usb_remove_hcd(hcd);
> + xhci_plat_phy_exit(xhci->shared_hcd);
> usb_put_hcd(xhci->shared_hcd);
>
> + usb_remove_hcd(hcd);
> + xhci_plat_phy_exit(hcd);
> clk_disable_unprepare(clk);
> usb_put_hcd(hcd);
>
> @@ -311,7 +369,8 @@ static int xhci_plat_suspend(struct device *dev)
> if (ret)
> return ret;
>
> - usb_phy_shutdown(xhci->shared_hcd->usb_phy);
> + xhci_plat_phy_exit(xhci->shared_hcd);
> + xhci_plat_phy_exit(hcd);
> clk_disable_unprepare(xhci->clk);
>
> return ret;
> @@ -327,7 +386,11 @@ static int xhci_plat_resume(struct device *dev)
> if (ret)
> return ret;
>
> - ret = usb_phy_init(xhci->shared_hcd->usb_phy);
> + ret = xhci_plat_phy_init(hcd);
> + if (ret)
> + return ret;
> +
> + ret = xhci_plat_phy_init(xhci->shared_hcd);
> if (ret)
> return ret;
>
> --
> 2.8.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html

--
balbi
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2016-04-27 08:01    [W:0.306 / U:0.348 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site