Messages in this thread | | | From | "David Rivshin (Allworx)" <> | Subject | [PATCH net v2 0/3] drivers: net: cpsw: phy-handle fixes | Date | Wed, 20 Apr 2016 23:51:31 -0400 |
| |
From: David Rivshin <drivshin@allworx.com>
The first patch fixes a bug that makes dual_emac mode break if either slave uses the phy-handle property in the devicetree.
The second patch fixes some cosmetic problems with error messages, and also makes the binding documentation more explicit.
The third patch cleans up the fixed-link case to work like the now-fixed phy-handle case.
I have tested on the following hardware configurations: - (EVMSK) dual emac, phy_id property in both slaves - (EVMSK) dual emac, phy-handle property in both slaves - (BeagleBoneBlack) single emac, phy_id property - (custom) single emac, fixed-link subnode
Nicolas Chauvet reported testing on an HP t410 (dm8148).
Markus Brunner reported testing v1 on the following [1]: - emac0 with phy_id and emac1 with fixed phy - emac0 with phy-handle and emac1 with fixed phy - emac0 with fixed phy and emac1 with fixed phy
Changes since v1 [2]: - Rebased - Added Tested-by from Nicolas Chauvet on all patches - Added Acked-by from Rob Herring for the binding change in patch 2 [3]
[1] http://www.spinics.net/lists/netdev/msg357890.html [2] http://www.spinics.net/lists/netdev/msg357772.html [3] http://www.spinics.net/lists/netdev/msg358254.html
David Rivshin (3): drivers: net: cpsw: fix parsing of phy-handle DT property in dual_emac config drivers: net: cpsw: fix error messages when using phy-handle DT property drivers: net: cpsw: use of_phy_connect() in fixed-link case
Documentation/devicetree/bindings/net/cpsw.txt | 4 +-- drivers/net/ethernet/ti/cpsw.c | 41 +++++++++++++------------- drivers/net/ethernet/ti/cpsw.h | 1 + 3 files changed, 23 insertions(+), 23 deletions(-)
-- 2.5.5
| |