lkml.org 
[lkml]   [2016]   [Apr]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 13/14] USB: ch341: get rid of default configuration
Date
If the serial port hasn't been opened yet, no baud rate should be
set and RTS/DTR need to be deasserted.

Signed-off-by: Grigori Goronzy <greg@chown.ath.cx>
---
drivers/usb/serial/ch341.c | 7 -------
1 file changed, 7 deletions(-)

diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index 3b9a43d..6981e2ad 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -25,7 +25,6 @@
#include <linux/serial.h>
#include <asm/unaligned.h>

-#define DEFAULT_BAUD_RATE 9600
#define DEFAULT_TIMEOUT 1000

/* flags for IO-Bits */
@@ -235,10 +234,6 @@ static int ch341_configure(struct usb_device *dev, struct ch341_private *priv)
if (r < 0)
goto out;

- r = ch341_init_set_baudrate(dev, priv, 0);
- if (r < 0)
- goto out;
-
r = ch341_set_handshake(dev, priv->line_control);
if (r < 0)
goto out;
@@ -261,8 +256,6 @@ static int ch341_port_probe(struct usb_serial_port *port)
return -ENOMEM;

spin_lock_init(&priv->lock);
- priv->baud_rate = DEFAULT_BAUD_RATE;
- priv->line_control = CH341_BIT_RTS | CH341_BIT_DTR;

r = ch341_configure(port->serial->dev, priv);
if (r < 0)
--
1.9.1
\
 
 \ /
  Last update: 2016-04-02 19:41    [W:0.095 / U:0.348 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site