lkml.org 
[lkml]   [2016]   [Apr]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] [media] atmel-isc: DT binding for Image Sensor Controller driver
+ linux-media@vger.kernel.org

On Wed, Apr 13, 2016 at 03:44:20PM +0800, Songjun Wu wrote:
> DT binding documentation for ISC driver.
>
> Signed-off-by: Songjun Wu <songjun.wu@atmel.com>
> ---
>
> .../devicetree/bindings/media/atmel-isc.txt | 84 ++++++++++++++++++++++
> 1 file changed, 84 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/atmel-isc.txt
>
> diff --git a/Documentation/devicetree/bindings/media/atmel-isc.txt b/Documentation/devicetree/bindings/media/atmel-isc.txt
> new file mode 100644
> index 0000000..449f05f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/atmel-isc.txt
> @@ -0,0 +1,84 @@
> +Atmel Image Sensor Controller (ISC)
> +----------------------------------------------
> +
> +Required properties:
> +- compatible
> + Must be "atmel,sama5d2-isc"
> +- reg
> + Physical base address and length of the registers set for the device;
> +- interrupts
> + Should contain IRQ line for the ISI;
> +- clocks
> + List of clock specifiers, corresponding to entries in
> + the clock-names property;
> + Please refer to clock-bindings.txt.
> +- clock-names
> + Required elements: "hclock", "ispck".
> +- pinctrl-names, pinctrl-0
> + Please refer to pinctrl-bindings.txt.
> +- clk_in_isc
> + ISC internal clock node, it includes the isc_ispck and isc_mck.
> + Please refer to clock-bindings.txt.
> +- atmel,sensor-preferred
> + Sensor is preferred to process image (1-preferred, 0-not).
> + The default value is 1.
> +
> +ISC supports a single port node with parallel bus. It should contain one
> +'port' child node with child 'endpoint' node. Please refer to the bindings
> +defined in Documentation/devicetree/bindings/media/video-interfaces.txt.
> +
> +Example:
> +isc: isc@f0008000 {
> + compatible = "atmel,sama5d2-isc";
> + reg = <0xf0008000 0x4000>;
> + interrupts = <46 IRQ_TYPE_LEVEL_HIGH 5>;
> + clocks = <&isc_clk>, <&isc_ispck>;
> + clock-names = "hclock", "ispck";
> + atmel,sensor-preferred = <1>;
> +
> + port {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + isc_0: endpoint@0 {
> + remote-endpoint = <&ov7740_0>;
> + hsync-active = <1>;
> + vsync-active = <0>;
> + pclk-sample = <1>;
> + };
> + };
> +
> + clk_in_isc {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + isc_ispck: isc_ispck {
> + #clock-cells = <0>;
> + reg = <0>;
> + clocks = <&isc_clk>, <&iscck>;
> + };
> +
> + isc_mck: isc_mck {
> + #clock-cells = <0>;
> + reg = <1>;
> + clocks = <&isc_clk>, <&iscck>, <&isc_gclk>;
> + };
> + };
> +};
> +
> +i2c1: i2c@fc028000 {
> + ov7740: camera@0x21 {
> + compatible = "ovti,ov7740";
> + reg = <0x21>;
> +
> + clocks = <&isc_mck>;
> + clock-names = "xvclk";
> + assigned-clocks = <&isc_mck>;
> + assigned-clock-rates = <24000000>;
> +
> + port {
> + ov7740_0: endpoint {
> + remote-endpoint = <&isc_0>;
> + };
> + };
> +};
> --
> 2.7.4
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

\
 
 \ /
  Last update: 2016-04-15 11:41    [W:0.428 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site