lkml.org 
[lkml]   [2016]   [Apr]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] [media] atmel-isc: DT binding for Image Sensor Controller driver
Date
DT binding documentation for ISC driver.

Signed-off-by: Songjun Wu <songjun.wu@atmel.com>
---

.../devicetree/bindings/media/atmel-isc.txt | 84 ++++++++++++++++++++++
1 file changed, 84 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/atmel-isc.txt

diff --git a/Documentation/devicetree/bindings/media/atmel-isc.txt b/Documentation/devicetree/bindings/media/atmel-isc.txt
new file mode 100644
index 0000000..449f05f
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/atmel-isc.txt
@@ -0,0 +1,84 @@
+Atmel Image Sensor Controller (ISC)
+----------------------------------------------
+
+Required properties:
+- compatible
+ Must be "atmel,sama5d2-isc"
+- reg
+ Physical base address and length of the registers set for the device;
+- interrupts
+ Should contain IRQ line for the ISI;
+- clocks
+ List of clock specifiers, corresponding to entries in
+ the clock-names property;
+ Please refer to clock-bindings.txt.
+- clock-names
+ Required elements: "hclock", "ispck".
+- pinctrl-names, pinctrl-0
+ Please refer to pinctrl-bindings.txt.
+- clk_in_isc
+ ISC internal clock node, it includes the isc_ispck and isc_mck.
+ Please refer to clock-bindings.txt.
+- atmel,sensor-preferred
+ Sensor is preferred to process image (1-preferred, 0-not).
+ The default value is 1.
+
+ISC supports a single port node with parallel bus. It should contain one
+'port' child node with child 'endpoint' node. Please refer to the bindings
+defined in Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Example:
+isc: isc@f0008000 {
+ compatible = "atmel,sama5d2-isc";
+ reg = <0xf0008000 0x4000>;
+ interrupts = <46 IRQ_TYPE_LEVEL_HIGH 5>;
+ clocks = <&isc_clk>, <&isc_ispck>;
+ clock-names = "hclock", "ispck";
+ atmel,sensor-preferred = <1>;
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ isc_0: endpoint@0 {
+ remote-endpoint = <&ov7740_0>;
+ hsync-active = <1>;
+ vsync-active = <0>;
+ pclk-sample = <1>;
+ };
+ };
+
+ clk_in_isc {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ isc_ispck: isc_ispck {
+ #clock-cells = <0>;
+ reg = <0>;
+ clocks = <&isc_clk>, <&iscck>;
+ };
+
+ isc_mck: isc_mck {
+ #clock-cells = <0>;
+ reg = <1>;
+ clocks = <&isc_clk>, <&iscck>, <&isc_gclk>;
+ };
+ };
+};
+
+i2c1: i2c@fc028000 {
+ ov7740: camera@0x21 {
+ compatible = "ovti,ov7740";
+ reg = <0x21>;
+
+ clocks = <&isc_mck>;
+ clock-names = "xvclk";
+ assigned-clocks = <&isc_mck>;
+ assigned-clock-rates = <24000000>;
+
+ port {
+ ov7740_0: endpoint {
+ remote-endpoint = <&isc_0>;
+ };
+ };
+};
--
2.7.4
\
 
 \ /
  Last update: 2016-04-13 10:01    [W:0.199 / U:2.820 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site