lkml.org 
[lkml]   [2016]   [Mar]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] regulator: gpio: check return value of of_get_named_gpio
Date
At boot time the regulator driver can be initialized before the
gpio, in which case the call to of_get_named_gpio will return
EPROBE_DEFER. This value is silently passed to regulator_register
which will return success, although the gpio is not registered
(regulator_ena_gpio_request not called) as the value passed is
detected as invalid. The gpio_regulator_probe will therefore
succeed with no gpio requested.

Signed-off-by: Mihai Mihalache <mihai.d.mihalache@intel.com>
Reviewed-by: Hans Holmberg <hans.holmberg@intel.com>
---
drivers/regulator/gpio-regulator.c | 2 ++
1 file changed, 2 insertions(+)

diff --git a/drivers/regulator/gpio-regulator.c b/drivers/regulator/gpio-regulator.c
index 464018d..429294f 100644
--- a/drivers/regulator/gpio-regulator.c
+++ b/drivers/regulator/gpio-regulator.c
@@ -162,6 +162,8 @@ of_get_gpio_regulator_config(struct device *dev, struct device_node *np,
of_property_read_u32(np, "startup-delay-us", &config->startup_delay);

config->enable_gpio = of_get_named_gpio(np, "enable-gpio", 0);
+ if(IS_ERR_VALUE(config->enable_gpio))
+ return ERR_PTR(config->enable_gpio);

/* Fetch GPIOs. - optional property*/
ret = of_gpio_count(np);
--
1.7.9.5
\
 
 \ /
  Last update: 2016-03-09 15:41    [W:0.203 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site