lkml.org 
[lkml]   [2016]   [Mar]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH net-next] phy: keep the BCMR_LOOPBACK bit while setup forced mode
When tested the PHY SGMII Loopback,:
1.set the LOOPBACK bit,
2.set the autoneg to AUTONEG_DISABLE, it calls the
genphy_setup_forced which will clear the bit.

So just keep the LOOPBACK bit while setup forced mode.

Signed-off-by: Weidong Wang <wangweidong1@huawei.com>
---
drivers/net/phy/phy_device.c | 2 ++
1 file changed, 2 insertions(+)

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index e551f3a..8da4b80 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1124,7 +1124,9 @@ static int genphy_config_advert(struct phy_device *phydev)
int genphy_setup_forced(struct phy_device *phydev)
{
int ctl = 0;
+ int val = phy_read(phydev, MII_BMCR);

+ ctl |= val & BMCR_LOOPBACK;
phydev->pause = 0;
phydev->asym_pause = 0;

--
2.7.0

\
 
 \ /
  Last update: 2016-03-25 04:01    [W:0.288 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site