Messages in this thread | | | From | Nicolas Ferre <> | Subject | [PATCH v4 0/2] power: reset: support for Atmel alternative Shutdown Controller | Date | Thu, 10 Mar 2016 16:37:38 +0100 |
| |
This is a series to add driver for a new Atmel Shutdown Controller. This new IP is extensible and some features will be added later (see the TODO section). Its extensible nature led to write a new binding so that wake-up sources can be described easily.
Changes in v4: - change property to debounce-delay-us so that we can use a generic property and we can have the unit explicitly included it the name according to Documentation/devicetree/bindings/property-units.txt. - move to atmel,wakeup-active-high boolean property instead of a "high", "low" string comparison. - fix warning found by 0-day robot: large integer implicitly truncated to unsigned type [-Woverflow] - add entry in MAINTAINERS file
Changes in v3: - get and use slow clock and specify its handler in binding - add the slow clock handle as the IP uses it - remove useless protection at the beginning of pm_power_off handler - allow to compile it as a module - add COMPILE_TEST directive in Kconfig - update description in file header
Changes in v2: - add MODULE_DEVICE_TABLE as advised by Sebastian Reichel - review indentation and braces to correct errors pointed out by checkpatch
Nicolas Ferre (2): ARM: dts: at91: shdwc binding: add new shutdown controller documentation power: reset: at91-shdwc: add new shutdown controller driver
.../devicetree/bindings/arm/atmel-at91.txt | 59 +++++ MAINTAINERS | 5 + drivers/power/reset/Kconfig | 8 + drivers/power/reset/Makefile | 1 + drivers/power/reset/at91-shdwc.c | 282 +++++++++++++++++++++ 5 files changed, 355 insertions(+) create mode 100644 drivers/power/reset/at91-shdwc.c
-- 2.1.3
| |