lkml.org 
[lkml]   [2016]   [Feb]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v5 11/14] dt/bindings: Add bindings for PIC32 SDHCI host controller
From
On 14 January 2016 at 02:15, Joshua Henderson
<joshua.henderson@microchip.com> wrote:
> From: Andrei Pistirica <andrei.pistirica@microchip.com>
>
> Document the devicetree bindings for the SDHCI peripheral found on
> Microchip PIC32 class devices.
>
> Signed-off-by: Andrei Pistirica <andrei.pistirica@microchip.com>
> Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
> Cc: Ralf Baechle <ralf@linux-mips.org>
> Acked-by: Rob Herring <robh@kernel.org>

I have picked this up and applied it to my next branch in my mmc tree.

Thanks and kind regards!
Uffe

> ---
> Changes since v4: None
> Changes since v3: None
> Changes since v2: None
> Changes since v1:
> - Drop usage of piomode and no-1-8-v DT properties
> ---
> .../bindings/mmc/microchip,sdhci-pic32.txt | 29 ++++++++++++++++++++
> 1 file changed, 29 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mmc/microchip,sdhci-pic32.txt
>
> diff --git a/Documentation/devicetree/bindings/mmc/microchip,sdhci-pic32.txt b/Documentation/devicetree/bindings/mmc/microchip,sdhci-pic32.txt
> new file mode 100644
> index 0000000..71ad57e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mmc/microchip,sdhci-pic32.txt
> @@ -0,0 +1,29 @@
> +* Microchip PIC32 SDHCI Controller
> +
> +This file documents differences between the core properties in mmc.txt
> +and the properties used by the sdhci-pic32 driver.
> +
> +Required properties:
> +- compatible: Should be "microchip,pic32mzda-sdhci"
> +- interrupts: Should contain interrupt
> +- clock-names: Should be "base_clk", "sys_clk".
> + See: Documentation/devicetree/bindings/resource-names.txt
> +- clocks: Phandle to the clock.
> + See: Documentation/devicetree/bindings/clock/clock-bindings.txt
> +- pinctrl-names: A pinctrl state names "default" must be defined.
> +- pinctrl-0: Phandle referencing pin configuration of the SDHCI controller.
> + See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt
> +
> +Example:
> +
> + sdhci@1f8ec000 {
> + compatible = "microchip,pic32mzda-sdhci";
> + reg = <0x1f8ec000 0x100>;
> + interrupts = <191 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&REFCLKO4>, <&PBCLK5>;
> + clock-names = "base_clk", "sys_clk";
> + bus-width = <4>;
> + cap-sd-highspeed;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_sdhc1>;
> + };
> --
> 1.7.9.5
>

\
 
 \ /
  Last update: 2016-02-08 11:21    [W:0.054 / U:0.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site