lkml.org 
[lkml]   [2016]   [Feb]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/3] ARM: omap1/ams-delta: warn about failed regulator enable
Date
The modem pm handler in the ams-delta board uses regulator_enable()
but does not check for a successful return code:

board-ams-delta.c:521:3: error: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Werror=unused-result]

It is not easy to propagate that return code to the callers in
uart_configure_port/uart_suspend_port/uart_resume_port, unless
we change all UART drivers, and it is unclear what those would
do with the return code.

Instead, this patch uses a runtime warning to replace the
compiletime warning. I have checked that the regulator in question
is hardcoded to a fixed-voltage GPIO regulator, and that should
never fail to get enabled if I understand the code right.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/mach-omap1/board-ams-delta.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 6613a6ff5dbc..6cbc69c92913 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -510,6 +510,7 @@ static void __init ams_delta_init(void)
static void modem_pm(struct uart_port *port, unsigned int state, unsigned old)
{
struct modem_private_data *priv = port->private_data;
+ int ret;

if (IS_ERR(priv->regulator))
return;
@@ -518,9 +519,16 @@ static void modem_pm(struct uart_port *port, unsigned int state, unsigned old)
return;

if (state == 0)
- regulator_enable(priv->regulator);
+ ret = regulator_enable(priv->regulator);
else if (old == 0)
- regulator_disable(priv->regulator);
+ ret = regulator_disable(priv->regulator);
+ else
+ ret = 0;
+
+ if (ret)
+ dev_warn(port->dev,
+ "ams_delta modem_pm: failed to %sable regulator: %d\n",
+ state ? "dis" : "en", ret);
}

static struct plat_serial8250_port ams_delta_modem_ports[] = {
--
2.7.0
\
 
 \ /
  Last update: 2016-02-23 15:21    [W:0.038 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site