lkml.org 
[lkml]   [2016]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/5] arm64: dts: Enable bus frequency scaling on Exynos5433-based TM2 board
Date
This patches add the AMBA bus Device-tree node unsing VDD_INT
to enable the bus frequency scaling on Exynos5433-based TM2 board.

There are two kind of bus device with devfreq framework.
- Parent bus device : Change the frequency/voltage according to bus's utilization.
- Passive bus device : Change only frequency according to the new level
of parent bus device.

The VDD_INT regulator provides the power source to INT (Internal) block as
following. The sub-blocks in the INT block share the one power source.
VDD_INT |--- G2D_400 (parent device)
|--- G2D_266
|--- GSCL
|--- JPEG
|--- HEVC
|--- MFC
|--- MSCL
|--- NoC0
|--- NoC1
|--- NoC2
|--- PERIS (Fixed clock rate)
|--- PERIC (Fixed clock rate)
|--- FSYS (Fixed clock rate)

Each sub-block has the bus clock as following:
- CLK_ACLK_G2D_{400|266} : Bus clock for G2D (2D graphic engine)
- CLK_ACLK_MSCL_400 : Bus clock for MSCL (Memory to memory Scaler)
- CLK_ACLK_GSCL_333 : Bus clock for GSCL (General Scaler)
- CLK_SCLK_JPEG_MSCL : Bus clock for JPEG
- CLK_ACLK_MFC_400 : Bus clock for MFC (Multi Format Codec)
- CLK_ACLK_HEVC_400 : Bus clock for HEVC (High Effective Video Codec)
- CLK_ACLK_BUS0_400 : NoC(Network On Chip)'s bus clock for PERIC/PERIS/FSYS/MSCL
- CLK_ACLK_BUS1_400 : NoC's bus clock for MFC/HEVC/G3D
- CLK_ACLK_BUS2_400 : NoC's bus clock for GSCL/DISP/G2D/CAM0/CAM1/ISP

Changes from v1:
- Remove duplicate description of exynos5433-bus.dtsi
- Move the bus device-tree node under the 'soc'
- Modify the node name of bus from 'bus_xxx_xxx' to 'bus[number]'
- Reorder the bus device-tree node alpabetically
- Change the node name from 'bus_busX' to 'bus_nocX'
- Fix minor issue
- Add reviewed-by tag of Krzysztof Kozlowski for patch3/5

Chanwoo Choi (5):
clk: samsung: exynos5433: Set NoC (Network On Chip) clocks as critical
PM / devfreq: exynos-bus: Add the detailed correlation for Exynos5433
arm64: dts: exynos5433: Add PPMU dt node
arm64: dts: exynos5433: Add bus dt node using VDD_INT for Exynos5433
arm64: dts: exynos5433: Add support of bus frequency using VDD_INT on TM2

.../devicetree/bindings/devfreq/exynos-bus.txt | 15 ++
arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi | 197 +++++++++++++++++++++
arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 70 ++++++++
arch/arm64/boot/dts/exynos/exynos5433.dtsi | 25 +++
drivers/clk/samsung/clk-exynos5433.c | 8 +-
5 files changed, 311 insertions(+), 4 deletions(-)
create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi

--
1.9.1

\
 
 \ /
  Last update: 2016-12-08 06:00    [W:0.144 / U:1.872 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site