lkml.org 
[lkml]   [2016]   [Dec]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 REGRESSION RESEND] usb: ohci-at91: use descriptor-based gpio APIs correctly
Date
The gpiod_get* function family does not want the -gpio suffix.
Use devm_gpiod_get_index_optional instead of devm_gpiod_get_optional.
The descriptor based APIs handle active high/low automatically.
The vbus-gpios are output, request enable while getting the gpio.
Don't try to get any vbus-gpios for ports outside num-ports.

WTF? Big sigh.

Fixes: 054d4b7b577d ("usb: ohci-at91: Use descriptor-based gpio APIs")
Signed-off-by: Peter Rosin <peda@axentia.se>
---

Hi!

Resending this, since the only response I've got is that the merge
window is open and that this patch has been put on hold due to that.
But I think this regression (which happend between v4.9 and current
master) should be fixed before the merge window closes.

v1 -> v2 changes:
- use devm_gpiod_get_index_optional instead of devm_gpiod_get_optional

Cheers,
peda

drivers/usb/host/ohci-at91.c | 24 ++++++++++--------------
1 file changed, 10 insertions(+), 14 deletions(-)

diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 1b2e09c32c6b..66ec407df2db 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -43,7 +43,6 @@ struct at91_usbh_data {
struct gpio_desc *overcurrent_pin[AT91_MAX_USBH_PORTS];
u8 ports; /* number of ports on root hub */
u8 overcurrent_supported;
- u8 vbus_pin_active_low[AT91_MAX_USBH_PORTS];
u8 overcurrent_status[AT91_MAX_USBH_PORTS];
u8 overcurrent_changed[AT91_MAX_USBH_PORTS];
};
@@ -268,8 +267,7 @@ static void ohci_at91_usb_set_power(struct at91_usbh_data *pdata, int port, int
if (!valid_port(port))
return;

- gpiod_set_value(pdata->vbus_pin[port],
- pdata->vbus_pin_active_low[port] ^ enable);
+ gpiod_set_value(pdata->vbus_pin[port], enable);
}

static int ohci_at91_usb_get_power(struct at91_usbh_data *pdata, int port)
@@ -277,8 +275,7 @@ static int ohci_at91_usb_get_power(struct at91_usbh_data *pdata, int port)
if (!valid_port(port))
return -EINVAL;

- return gpiod_get_value(pdata->vbus_pin[port]) ^
- pdata->vbus_pin_active_low[port];
+ return gpiod_get_value(pdata->vbus_pin[port]);
}

/*
@@ -535,18 +532,17 @@ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
pdata->ports = ports;

at91_for_each_port(i) {
- pdata->vbus_pin[i] = devm_gpiod_get_optional(&pdev->dev,
- "atmel,vbus-gpio",
- GPIOD_IN);
+ if (i >= pdata->ports)
+ break;
+
+ pdata->vbus_pin[i] =
+ devm_gpiod_get_index_optional(&pdev->dev, "atmel,vbus",
+ i, GPIOD_OUT_HIGH);
if (IS_ERR(pdata->vbus_pin[i])) {
err = PTR_ERR(pdata->vbus_pin[i]);
dev_err(&pdev->dev, "unable to claim gpio \"vbus\": %d\n", err);
continue;
}
-
- pdata->vbus_pin_active_low[i] = gpiod_get_value(pdata->vbus_pin[i]);
-
- ohci_at91_usb_set_power(pdata, i, 1);
}

at91_for_each_port(i) {
@@ -554,8 +550,8 @@ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
break;

pdata->overcurrent_pin[i] =
- devm_gpiod_get_optional(&pdev->dev,
- "atmel,oc-gpio", GPIOD_IN);
+ devm_gpiod_get_index_optional(&pdev->dev, "atmel,oc",
+ i, GPIOD_IN);
if (IS_ERR(pdata->overcurrent_pin[i])) {
err = PTR_ERR(pdata->overcurrent_pin[i]);
dev_err(&pdev->dev, "unable to claim gpio \"overcurrent\": %d\n", err);
--
2.1.4
\
 
 \ /
  Last update: 2016-12-22 10:54    [W:0.116 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site