lkml.org 
[lkml]   [2016]   [Nov]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] nxp/diu: enable diu support for t1042 platform
Date
From: Jason Jin <jason.jin@nxp.com>

This patch add the DIU support for t1042 platform.
signed-off-by: Jason Jin <jason.jin@nxp.com> [Meng Yi: Made file t1042rdb-specific]
Signed-off-by: Meng Yi <meng.yi@nxp.com>
---
arch/powerpc/platforms/85xx/Makefile | 1 +
arch/powerpc/platforms/85xx/t1042rdb_diu.c | 152 +++++++++++++++++++++++++++++
2 files changed, 153 insertions(+)
create mode 100644 arch/powerpc/platforms/85xx/t1042rdb_diu.c

diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index 7bc86da..fe19dad 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_P1022_RDK) += p1022_rdk.o
obj-$(CONFIG_P1023_RDB) += p1023_rdb.o
obj-$(CONFIG_TWR_P102x) += twr_p102x.o
obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o
+obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o
obj-$(CONFIG_STX_GP3) += stx_gp3.o
obj-$(CONFIG_TQM85xx) += tqm85xx.o
obj-$(CONFIG_SBC8548) += sbc8548.o
diff --git a/arch/powerpc/platforms/85xx/t1042rdb_diu.c b/arch/powerpc/platforms/85xx/t1042rdb_diu.c
new file mode 100644
index 0000000..58fa3d3
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/t1042rdb_diu.c
@@ -0,0 +1,152 @@
+/*
+ * T1042 platform DIU operation
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include <sysdev/fsl_soc.h>
+
+/*DIU Pixel ClockCR offset in scfg*/
+#define CCSR_SCFG_PIXCLKCR 0x28
+
+/* DIU Pixel Clock bits of the PIXCLKCR */
+#define PIXCLKCR_PXCKEN 0x80000000
+#define PIXCLKCR_PXCKINV 0x40000000
+#define PIXCLKCR_PXCKDLY 0x0000FF00
+#define PIXCLKCR_PXCLK_MASK 0x00FF0000
+
+/* Some CPLD register definitions */
+#define CPLD_DIUCSR 0x16
+#define CPLD_DIUCSR_DVIEN 0x80
+#define CPLD_DIUCSR_BACKLIGHT 0x0f
+
+struct device_node *cpld_node;
+
+/**
+ * t1042rdb_set_monitor_port: switch the output to a different monitor port
+ */
+static void t1042rdb_set_monitor_port(enum fsl_diu_monitor_port port)
+{
+ static void __iomem *cpld_base;
+
+ cpld_base = of_iomap(cpld_node, 0);
+ if (!cpld_base) {
+ pr_err("%s: Could not map cpld registers\n", __func__);
+ goto exit;
+ }
+
+ switch (port) {
+ case FSL_DIU_PORT_DVI:
+ /* Enable the DVI(HDMI) port, disable the DFP and
+ * the backlight
+ */
+ clrbits8(cpld_base + CPLD_DIUCSR, CPLD_DIUCSR_DVIEN);
+ break;
+ case FSL_DIU_PORT_LVDS:
+ /*
+ * LVDS also needs backlight enabled, otherwise the display
+ * will be blank.
+ */
+ /* Enable the DFP port, disable the DVI*/
+ setbits8(cpld_base + CPLD_DIUCSR, 0x01 << 8);
+ setbits8(cpld_base + CPLD_DIUCSR, 0x01 << 4);
+ setbits8(cpld_base + CPLD_DIUCSR, CPLD_DIUCSR_BACKLIGHT);
+ break;
+ default:
+ pr_err("%s: Unsupported monitor port %i\n", __func__, port);
+ }
+
+ iounmap(cpld_base);
+exit:
+ of_node_put(cpld_node);
+}
+
+/**
+ * t1042rdb_set_pixel_clock: program the DIU's clock
+ * @pixclock: pixel clock in ps (pico seconds)
+ */
+static void t1042rdb_set_pixel_clock(unsigned int pixclock)
+{
+ struct device_node *scfg_np;
+ void __iomem *scfg;
+ unsigned long freq;
+ u64 temp;
+ u32 pxclk;
+
+ scfg_np = of_find_compatible_node(NULL, NULL, "fsl,t1040-scfg");
+ if (!scfg_np) {
+ pr_err("%s: Missing scfg node. Can not display video.\n",
+ __func__);
+ return;
+ }
+
+ scfg = of_iomap(scfg_np, 0);
+ of_node_put(scfg_np);
+ if (!scfg) {
+ pr_err("%s: Could not map device. Can not display video.\n",
+ __func__);
+ return;
+ }
+
+ /* Convert pixclock into frequency */
+ temp = 1000000000000ULL;
+ do_div(temp, pixclock);
+ freq = temp;
+
+ /*
+ * 'pxclk' is the ratio of the platform clock to the pixel clock.
+ * This number is programmed into the PIXCLKCR register, and the valid
+ * range of values is 2-255.
+ */
+ pxclk = DIV_ROUND_CLOSEST(fsl_get_sys_freq(), freq);
+ pxclk = clamp_t(u32, pxclk, 2, 255);
+
+ /* Disable the pixel clock, and set it to non-inverted and no delay */
+ clrbits32(scfg + CCSR_SCFG_PIXCLKCR,
+ PIXCLKCR_PXCKEN | PIXCLKCR_PXCKDLY | PIXCLKCR_PXCLK_MASK);
+
+ /* Enable the clock and set the pxclk */
+ setbits32(scfg + CCSR_SCFG_PIXCLKCR, PIXCLKCR_PXCKEN | (pxclk << 16));
+
+ iounmap(scfg);
+}
+
+/**
+ * t1042rdb_valid_monitor_port: set the monitor port for sysfs
+ */
+static enum fsl_diu_monitor_port
+t1042rdb_valid_monitor_port(enum fsl_diu_monitor_port port)
+{
+ switch (port) {
+ case FSL_DIU_PORT_DVI:
+ case FSL_DIU_PORT_LVDS:
+ return port;
+ default:
+ return FSL_DIU_PORT_DVI; /* Dual-link LVDS is not supported */
+ }
+}
+
+static int __init t1042rdb_diu_init(void)
+{
+ cpld_node = of_find_compatible_node(NULL, NULL, "fsl,t1042rdb-cpld");
+ if (!cpld_node)
+ return 0;
+
+ diu_ops.set_monitor_port = t1042rdb_set_monitor_port;
+ diu_ops.set_pixel_clock = t1042rdb_set_pixel_clock;
+ diu_ops.valid_monitor_port = t1042rdb_valid_monitor_port;
+
+ return 0;
+}
+
+early_initcall(t1042rdb_diu_init);
--
2.1.0.27.g96db324
\
 
 \ /
  Last update: 2016-11-25 10:27    [W:0.037 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site