lkml.org 
[lkml]   [2016]   [Nov]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] drm: Add support for extracting sync signal drive edge from videomode
Date
The sync in some panels needs to be driven by different edge of the pixel
clock compared to data. This is reflected by the
DISPLAY_FLAGS_SYNC_(POS|NEG)EDGE in videmode flags.
Add similar similar definitions for bus_flags and convert the sync drive
edge via drm_bus_flags_from_videomode().

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
drivers/gpu/drm/drm_modes.c | 15 +++++++++++----
include/drm/drm_connector.h | 4 ++++
2 files changed, 15 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index ac6a35212501..a77f81f6b1d4 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -659,10 +659,12 @@ EXPORT_SYMBOL_GPL(drm_display_mode_to_videomode);
* drm_bus_flags_from_videomode - extract information about pixelclk and
* DE polarity from videomode and store it in a separate variable
* @vm: videomode structure to use
- * @bus_flags: information about pixelclk and DE polarity will be stored here
+ * @bus_flags: information about pixelclk, sync and DE polarity will be stored
+ * here
*
- * Sets DRM_BUS_FLAG_DE_(LOW|HIGH) and DRM_BUS_FLAG_PIXDATA_(POS|NEG)EDGE
- * in @bus_flags according to DISPLAY_FLAGS found in @vm
+ * Sets DRM_BUS_FLAG_DE_(LOW|HIGH), DRM_BUS_FLAG_PIXDATA_(POS|NEG)EDGE and
+ * DISPLAY_FLAGS_SYNC_(POS|NEG)EDGE in @bus_flags according to DISPLAY_FLAGS
+ * found in @vm
*/
void drm_bus_flags_from_videomode(const struct videomode *vm, u32 *bus_flags)
{
@@ -672,6 +674,11 @@ void drm_bus_flags_from_videomode(const struct videomode *vm, u32 *bus_flags)
if (vm->flags & DISPLAY_FLAGS_PIXDATA_NEGEDGE)
*bus_flags |= DRM_BUS_FLAG_PIXDATA_NEGEDGE;

+ if (vm->flags & DISPLAY_FLAGS_SYNC_POSEDGE)
+ *bus_flags |= DRM_BUS_FLAG_SYNC_POSEDGE;
+ if (vm->flags & DISPLAY_FLAGS_SYNC_NEGEDGE)
+ *bus_flags |= DRM_BUS_FLAG_SYNC_NEGEDGE;
+
if (vm->flags & DISPLAY_FLAGS_DE_LOW)
*bus_flags |= DRM_BUS_FLAG_DE_LOW;
if (vm->flags & DISPLAY_FLAGS_DE_HIGH)
@@ -684,7 +691,7 @@ EXPORT_SYMBOL_GPL(drm_bus_flags_from_videomode);
* of_get_drm_display_mode - get a drm_display_mode from devicetree
* @np: device_node with the timing specification
* @dmode: will be set to the return value
- * @bus_flags: information about pixelclk and DE polarity
+ * @bus_flags: information about pixelclk, sync and DE polarity
* @index: index into the list of display timings in devicetree
*
* This function is expensive and should only be used, if only one mode is to be
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 34f9741ebb5b..0ffb01a4f992 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -160,6 +160,10 @@ struct drm_display_info {
#define DRM_BUS_FLAG_PIXDATA_POSEDGE (1<<2)
/* drive data on neg. edge */
#define DRM_BUS_FLAG_PIXDATA_NEGEDGE (1<<3)
+/* drive sync on pos. edge */
+#define DRM_BUS_FLAG_SYNC_POSEDGE (1<<4)
+/* drive sync on neg. edge */
+#define DRM_BUS_FLAG_SYNC_NEGEDGE (1<<5)

/**
* @bus_flags: Additional information (like pixel signal polarity) for
--
2.11.0.rc2
\
 
 \ /
  Last update: 2016-11-22 12:13    [W:5.493 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site