lkml.org 
[lkml]   [2016]   [Oct]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 1/2] timers: Fix usleep_range() in the context of wake_up_process()
Date
Users of usleep_range() expect that it will _never_ return in less time
than the minimum passed parameter. However, nothing in any of the code
ensures this. Specifically:

usleep_range() => do_usleep_range() => schedule_hrtimeout_range() =>
schedule_hrtimeout_range_clock() just ends up calling schedule() with an
appropriate timeout set using the hrtimer. If someone else happens to
wake up our task then we'll happily return from usleep_range() early.

msleep() already has code to handle this case since it will loop as long
as there was still time left. usleep_range() had no such loop.

The problem is is easily demonstrated with a small bit of test code:

static int usleep_test_task(void *data)
{
atomic_t *done = data;
ktime_t start, end;

start = ktime_get();
usleep_range(50000, 100000);
end = ktime_get();
pr_info("Requested 50000 - 100000 us. Actually slept for %llu us\n",
(unsigned long long)ktime_to_us(ktime_sub(end, start)));
atomic_set(done, 1);

return 0;
}

static void run_usleep_test(void)
{
struct task_struct *t;
atomic_t done;

atomic_set(&done, 0);

t = kthread_run(usleep_test_task, &done, "usleep_test_task");
while (!atomic_read(&done)) {
wake_up_process(t);
udelay(1000);
}
kthread_stop(t);
}

If you run the above code without this patch you get things like:
Requested 50000 - 100000 us. Actually slept for 967 us

If you run the above code _with_ this patch, you get:
Requested 50000 - 100000 us. Actually slept for 98896 us

Presumably this problem was not detected before because:
- It's not terribly common to use wake_up_process() directly.
- Other ways for processes to wake up are not typically mixed with
usleep_range().
- There aren't lots of places that use usleep_range(), since many people
call either msleep() or udelay().

NOTES:
- An effort was made to look for users relying on the old behavior by
looking for usleep_range() in the same file as wake_up_process().
No problems was found by this search, though it is conceivable that
someone could have put the sleep and wakeup in two different files.
- An effort was made to ask several upstream maintainers if they were
aware of people relying on wake_up_process() to wake up
usleep_range(). No maintainers were aware of that but they were aware
of many people relying on usleep_range() never returning before the
minimum.

Reported-by: Tao Huang <huangtao@rock-chips.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
---
Changes in v5:
- Don't accidentally busy wait after first wakeup (Thomas Gleixner)
- Removed Reviewed-by tags

Changes in v4: None
Changes in v3:
- Add Reviewed-by tags
- Add notes about validation

Changes in v2:
- Fixed stupid bug that snuck in before posting
- Use ktime_before
- Remove delta from the loop

kernel/time/timer.c | 22 ++++++++++------------
1 file changed, 10 insertions(+), 12 deletions(-)

diff --git a/kernel/time/timer.c b/kernel/time/timer.c
index 32bf6f75a8fe..ab65e7bcc2c2 100644
--- a/kernel/time/timer.c
+++ b/kernel/time/timer.c
@@ -1896,16 +1896,6 @@ unsigned long msleep_interruptible(unsigned int msecs)

EXPORT_SYMBOL(msleep_interruptible);

-static void __sched do_usleep_range(unsigned long min, unsigned long max)
-{
- ktime_t kmin;
- u64 delta;
-
- kmin = ktime_set(0, min * NSEC_PER_USEC);
- delta = (u64)(max - min) * NSEC_PER_USEC;
- schedule_hrtimeout_range(&kmin, delta, HRTIMER_MODE_REL);
-}
-
/**
* usleep_range - Sleep for an approximate time
* @min: Minimum time in usecs to sleep
@@ -1919,7 +1909,15 @@ static void __sched do_usleep_range(unsigned long min, unsigned long max)
*/
void __sched usleep_range(unsigned long min, unsigned long max)
{
- __set_current_state(TASK_UNINTERRUPTIBLE);
- do_usleep_range(min, max);
+ ktime_t expires = ktime_add_us(ktime_get(), min);
+ u64 delta = (u64)(max - min) * NSEC_PER_USEC;
+
+ for (;;) {
+ __set_current_state(TASK_UNINTERRUPTIBLE);
+ /* Do not return before the requested sleep time has elapsed */
+ if (!schedule_hrtimeout_range(&expires, delta,
+ HRTIMER_MODE_ABS))
+ break;
+ }
}
EXPORT_SYMBOL(usleep_range);
--
2.8.0.rc3.226.g39d4020
\
 
 \ /
  Last update: 2016-10-21 18:01    [W:0.190 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site