lkml.org 
[lkml]   [2016]   [Oct]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRE: Device or HBA level QD throttling creates randomness in sequetial workload
Hi -

I found below conversation and it is on the same line as I wanted some
input from mailing list.

http://marc.info/?l=linux-kernel&m=147569860526197&w=2

I can do testing on any WIP item as Omar mentioned in above discussion.
https://github.com/osandov/linux/tree/blk-mq-iosched

Is there any workaround/alternative in latest upstream kernel, if user
wants to see limited penalty for Sequential Work load on HDD ?

` Kashyap

> -----Original Message-----
> From: Kashyap Desai [mailto:kashyap.desai@broadcom.com]
> Sent: Thursday, October 20, 2016 3:39 PM
> To: linux-scsi@vger.kernel.org
> Subject: Device or HBA level QD throttling creates randomness in
sequetial
> workload
>
> [ Apologize, if you find more than one instance of my email.
> Web based email client has some issue, so now trying git send mail.]
>
> Hi,
>
> I am doing some performance tuning in MR driver to understand how sdev
> queue depth and hba queue depth play role in IO submission from above
layer.
> I have 24 JBOD connected to MR 12GB controller and I can see performance
for
> 4K Sequential work load as below.
>
> HBA QD for MR controller is 4065 and Per device QD is set to 32
>
> queue depth from <fio> 256 reports 300K IOPS queue depth from <fio> 128
> reports 330K IOPS queue depth from <fio> 64 reports 360K IOPS queue
depth
> from <fio> 32 reports 510K IOPS
>
> In MR driver I added debug print and confirm that more IO come to driver
as
> random IO whenever I have <fio> queue depth more than 32.
>
> I have debug using scsi logging level and blktrace as well. Below is
snippet of
> logs using scsi logging level. In summary, if SML do flow control of IO
due to
> Device QD or HBA QD, IO coming to LLD is more random pattern.
>
> I see IO coming to driver is not sequential.
>
> [79546.912041] sd 18:2:21:0: [sdy] tag#854 CDB: Write(10) 2a 00 00 03 c0
3b 00
> 00 01 00 [79546.912049] sd 18:2:21:0: [sdy] tag#855 CDB: Write(10) 2a 00
00 03
> c0 3c 00 00 01 00 [79546.912053] sd 18:2:21:0: [sdy] tag#886 CDB:
Write(10) 2a
> 00 00 03 c0 5b 00 00 01 00
>
> <KD> After LBA "00 03 c0 3c" next command is with LBA "00 03 c0 5b".
> Two Sequence are overlapped due to sdev QD throttling.
>
> [79546.912056] sd 18:2:21:0: [sdy] tag#887 CDB: Write(10) 2a 00 00 03 c0
5c 00
> 00 01 00 [79546.912250] sd 18:2:21:0: [sdy] tag#856 CDB: Write(10) 2a 00
00 03
> c0 3d 00 00 01 00 [79546.912257] sd 18:2:21:0: [sdy] tag#888 CDB:
Write(10) 2a
> 00 00 03 c0 5d 00 00 01 00 [79546.912259] sd 18:2:21:0: [sdy] tag#857
CDB:
> Write(10) 2a 00 00 03 c0 3e 00 00 01 00 [79546.912268] sd 18:2:21:0:
[sdy]
> tag#858 CDB: Write(10) 2a 00 00 03 c0 3f 00 00 01 00
>
> If scsi_request_fn() breaks due to unavailability of device queue (due
to below
> check), will there be any side defect as I observe ?
> if (!scsi_dev_queue_ready(q, sdev))
> break;
>
> If I reduce HBA QD and make sure IO from above layer is throttled due to
HBA
> QD, there is a same impact.
> MR driver use host wide shared tag map.
>
> Can someone help me if this can be tunable in LLD providing additional
settings
> or it is expected behavior ? Problem I am facing is, I am not able to
figure out
> optimal device queue depth for different configuration and work load.
>
> Thanks, Kashyap

\
 
 \ /
  Last update: 2016-10-21 14:15    [W:0.156 / U:0.300 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site