lkml.org 
[lkml]   [2016]   [Oct]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] [linux-next] Doc: cciss: Fix a typo in cciss.txt
Date
This patch fix a spelling typo in cciss.txt

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
---
Documentation/blockdev/cciss.txt | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/blockdev/cciss.txt b/Documentation/blockdev/cciss.txt
index b79d0a13e7cd..3a5477cc456e 100644
--- a/Documentation/blockdev/cciss.txt
+++ b/Documentation/blockdev/cciss.txt
@@ -184,7 +184,7 @@ infrequently used and the primary purpose of Smart Array controllers is to
act as a RAID controller for disk drives, so the vast majority of commands
are allocated for disk devices. However, if you have more than a few tape
drives attached to a smart array, the default number of commands may not be
-enought (for example, if you have 8 tape drives, you could only rewind 6
+enough (for example, if you have 8 tape drives, you could only rewind 6
at one time with the default number of commands.) The cciss_tape_cmds module
parameter allows more commands (up to 16 more) to be allocated for use by
tape drives. For example:
--
2.10.1.502.g6598894
\
 
 \ /
  Last update: 2016-10-20 22:00    [W:0.062 / U:0.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site