lkml.org 
[lkml]   [2016]   [Jan]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 2/3] Input: cyttsp - add device tree bindings
On Sun, Jan 10, 2016 at 06:36:08PM +0100, Oreste Salerno wrote:
> Signed-off-by: Oreste Salerno <oreste.salerno@tomtom.com>
> ---
> .../bindings/input/touchscreen/cyttsp.txt | 82 +++++++++++++
> drivers/input/touchscreen/cyttsp_core.c | 134 +++++++++++++++++++--
> include/linux/input/cyttsp.h | 3 +
> 3 files changed, 212 insertions(+), 7 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/input/touchscreen/cyttsp.txt
>
> diff --git a/Documentation/devicetree/bindings/input/touchscreen/cyttsp.txt b/Documentation/devicetree/bindings/input/touchscreen/cyttsp.txt
> new file mode 100644
> index 0000000..2dc5c65
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/input/touchscreen/cyttsp.txt
> @@ -0,0 +1,82 @@
> +* Cypress cyttsp touchscreen controller
> +
> +Required properties:
> +- compatible : must be "cypress,cyttsp-i2c" or "cypress,cyttsp-spi"
> +- reg : Device I2C address or SPI chip select number
> +- spi-max-frequency : Maximum SPI clocking speed of the device (for cyttsp-spi)
> +- interrupt-parent : the phandle for the gpio controller
> + (see interrupt binding[0]).
> +- interrupts : (gpio) interrupt to which the chip is connected
> + (see interrupt binding[0]).
> +- reset-gpios : the reset gpio the chip is connected to
> + (see GPIO binding[1] for more details).
> +- touchscreen-size-x : horizontal resolution of touchscreen (in pixels)
> +- touchscreen-size-y : vertical resolution of touchscreen (in pixels)
> +- bootloader-key : the 8-byte bootloader key that is required to switch
> + the chip from bootloader mode (default mode) to
> + application mode.
> + This property has to be specified as an array of 8
> + '/bits/ 8' values.
> +
> +Optional properties:
> +- active-distance : the distance in pixels beyond which a touch must move
> + before movement is detected and reported by the device.
> + Valid values: 0-15.

Wouldn't this be the same as touchscreen-fuzz-(x|y) which is the
replacement for the deprecated moving-threshold?

> +- active-interval-ms : the minimum period in ms between consecutive
> + scanning/processing cycles when the chip is in active mode.
> + Valid values: 0-255.
> +- lowpower-interval-ms : the minimum period in ms between consecutive
> + scanning/processing cycles when the chip is in low-power mode.
> + Valid values: 0-2550
> +- touch-timeout-ms : minimum time in ms spent in the active power state while no
> + touches are detected before entering low-power mode.
> + Valid values: 0-2550
> +

Otherwise, looks fine.

\
 
 \ /
  Last update: 2016-01-11 04:41    [W:0.106 / U:0.888 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site