lkml.org 
[lkml]   [2016]   [Jan]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 2/3] Input: cyttsp - add device tree bindings
Hi Oreste,

On Sun, Jan 10, 2016 at 06:36:08PM +0100, Oreste Salerno wrote:
> Signed-off-by: Oreste Salerno <oreste.salerno@tomtom.com>
> ---
> .../bindings/input/touchscreen/cyttsp.txt | 82 +++++++++++++
> drivers/input/touchscreen/cyttsp_core.c | 134 +++++++++++++++++++--
> include/linux/input/cyttsp.h | 3 +
> 3 files changed, 212 insertions(+), 7 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/input/touchscreen/cyttsp.txt
>
> diff --git a/Documentation/devicetree/bindings/input/touchscreen/cyttsp.txt b/Documentation/devicetree/bindings/input/touchscreen/cyttsp.txt
> new file mode 100644
> index 0000000..2dc5c65
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/input/touchscreen/cyttsp.txt
> @@ -0,0 +1,82 @@
> +* Cypress cyttsp touchscreen controller
> +
> +Required properties:
> +- compatible : must be "cypress,cyttsp-i2c" or "cypress,cyttsp-spi"
> +- reg : Device I2C address or SPI chip select number
> +- spi-max-frequency : Maximum SPI clocking speed of the device (for cyttsp-spi)

Stray space before tab after spi-max-frequency.

> +- interrupt-parent : the phandle for the gpio controller
> + (see interrupt binding[0]).
> +- interrupts : (gpio) interrupt to which the chip is connected
> + (see interrupt binding[0]).
> +- reset-gpios : the reset gpio the chip is connected to
> + (see GPIO binding[1] for more details).
> +- touchscreen-size-x : horizontal resolution of touchscreen (in pixels)
> +- touchscreen-size-y : vertical resolution of touchscreen (in pixels)

Let's direct users to common touchscreen properties.

> +- bootloader-key : the 8-byte bootloader key that is required to switch
> + the chip from bootloader mode (default mode) to
> + application mode.
> + This property has to be specified as an array of 8
> + '/bits/ 8' values.
> +
> +Optional properties:
> +- active-distance : the distance in pixels beyond which a touch must move
> + before movement is detected and reported by the device.
> + Valid values: 0-15.
> +- active-interval-ms : the minimum period in ms between consecutive
> + scanning/processing cycles when the chip is in active mode.
> + Valid values: 0-255.
> +- lowpower-interval-ms : the minimum period in ms between consecutive
> + scanning/processing cycles when the chip is in low-power mode.
> + Valid values: 0-2550
> +- touch-timeout-ms : minimum time in ms spent in the active power state while no
> + touches are detected before entering low-power mode.
> + Valid values: 0-2550
> +
> +[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
> +[1]: Documentation/devicetree/bindings/gpio/gpio.txt
> +
> +Example:
> + &i2c1 {
> + /* ... */
> + cyttsp@a {
> + compatible = "cypress,cyttsp-i2c";
> + reg = <0xa>;
> + interrupt-parent = <&msm_gpio>;
> + interrupts = <13 0x2008>;
> + reset-gpios = <&msm_gpio 12 0x00>;
> +
> + touchscreen-size-x = <800>;
> + touchscreen-size-y = <480>;
> + bootloader-key = /bits/ 8 <0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08>;
> +
> + active-distance = <8>;
> + active-interval-ms = <0>;
> + lowpower-interval-ms = <200>;
> + touch-timeout-ms = <100>;
> + };
> +
> + /* ... */
> + };
> +
> + &mcspi1 {
> + /* ... */
> + cyttsp@0 {
> + compatible = "cypress,cyttsp-spi";
> + spi-max-frequency = <6000000>;
> + reg = <0>;
> + interrupt-parent = <&msm_gpio>;
> + interrupts = <13 0x2008>;
> + reset-gpios = <&msm_gpio 12 0x00>;
> +
> + touchscreen-size-x = <800>;
> + touchscreen-size-y = <480>;
> + bootloader-key = /bits/ 8 <0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08>;
> +
> + active-distance = <8>;
> + active-interval-ms = <0>;
> + lowpower-interval-ms = <200>;
> + touch-timeout-ms = <100>;
> + };
> +
> + /* ... */
> + };
> diff --git a/drivers/input/touchscreen/cyttsp_core.c b/drivers/input/touchscreen/cyttsp_core.c
> index 5b74e8b..5dc6bf6 100644
> --- a/drivers/input/touchscreen/cyttsp_core.c
> +++ b/drivers/input/touchscreen/cyttsp_core.c
> @@ -33,6 +33,8 @@
> #include <linux/gpio.h>
> #include <linux/interrupt.h>
> #include <linux/slab.h>
> +#include <linux/of.h>
> +#include <linux/gpio/consumer.h>
>
> #include "cyttsp_core.h"
>
> @@ -57,6 +59,7 @@
> #define CY_DELAY_DFLT 20 /* ms */
> #define CY_DELAY_MAX 500
> #define CY_ACT_DIST_DFLT 0xF8
> +#define CY_ACT_DIST_MASK 0x0F
> #define CY_HNDSHK_BIT 0x80
> /* device mode bits */
> #define CY_OPERATE_MODE 0x00
> @@ -528,18 +531,136 @@ static void cyttsp_close(struct input_dev *dev)
> cyttsp_disable(ts);
> }
>
> +#ifdef CONFIG_OF
> +static const struct cyttsp_platform_data *cyttsp_parse_dt(struct device *dev)
> +{
> + struct device_node *np = dev->of_node;
> + struct cyttsp_platform_data *pdata;
> + u32 dt_value;
> + int ret;
> + static const char err_msg[] =
> + "property not provided in the device tree";
> +
> + if (!np)
> + return ERR_PTR(-ENOENT);
> +
> + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
> + if (!pdata)
> + return ERR_PTR(-ENOMEM);
> +
> + pdata->bl_keys = devm_kzalloc(dev, CY_NUM_BL_KEYS, GFP_KERNEL);
> + if (!pdata->bl_keys)
> + return ERR_PTR(-ENOMEM);
> +
> + /* Set some default values */
> + pdata->act_dist = CY_ACT_DIST_DFLT;
> + pdata->act_intrvl = CY_ACT_INTRVL_DFLT;
> + pdata->tch_tmout = CY_TCH_TMOUT_DFLT;
> + pdata->lp_intrvl = CY_LP_INTRVL_DFLT;
> + pdata->name = "cyttsp";
> +
> + ret = of_property_read_u32(np, "touchscreen-size-x", &pdata->maxx);
> + if (ret) {
> + dev_err(dev, "touchscreen-size-x %s\n", err_msg);
> + return ERR_PTR(ret);
> + }
> +
> + ret = of_property_read_u32(np, "touchscreen-size-y", &pdata->maxy);
> + if (ret) {
> + dev_err(dev, "touchscreen-size-y %s\n", err_msg);
> + return ERR_PTR(ret);
> + }

I'd rather we called touchscreen_parse_properties() in common code when
setting up the input device. It should work for variety of platform
providers (OF, ACPI, etc).

> +
> + pdata->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
> + if (IS_ERR(pdata->reset_gpio)) {
> + ret = PTR_ERR(pdata->reset_gpio);
> + dev_err(dev, "error acquiring reset gpio: %d\n", ret);
> + return ERR_PTR(ret);
> + }

Please call it directly in probe(). Again, it should work fine not only
on OF, but on all other platforms, so

> +
> + ret = of_property_read_u8_array(np, "bootloader-key",
> + pdata->bl_keys, CY_NUM_BL_KEYS);
> + if (ret) {
> + dev_err(dev, "bootloader-key %s\n", err_msg);
> + return ERR_PTR(ret);
> + }
> +
> + if (!of_property_read_u32(np, "active-distance", &dt_value)) {
> + if (dt_value > 15) {
> + dev_err(dev, "active-distance (%u) must be [0-15]\n",
> + dt_value);
> + return ERR_PTR(-EINVAL);
> + }
> + pdata->act_dist &= ~CY_ACT_DIST_MASK;
> + pdata->act_dist |= (u8)dt_value;

I do not think you need to cast.

> + }
> +
> + if (!of_property_read_u32(np, "active-interval-ms", &dt_value)) {
> + if (dt_value > 255) {
> + dev_err(dev, "active-interval-ms (%u) must be [0-255]\n",
> + dt_value);
> + return ERR_PTR(-EINVAL);
> + }
> + pdata->act_intrvl = (u8)dt_value;

I do not think you need to cast.

> + }
> +
> + if (!of_property_read_u32(np, "lowpower-interval-ms", &dt_value)) {
> + if (dt_value > 2550) {
> + dev_err(dev, "lowpower-interval-ms (%u) must be [0-2550]\n",
> + dt_value);
> + return ERR_PTR(-EINVAL);
> + }
> + /* Register value is expressed in 0.01s / bit */
> + pdata->lp_intrvl = (u8)(dt_value/10);

Spaces around operations please. Do we need explicit cast here?

> + }
> +
> + if (!of_property_read_u32(np, "touch-timeout-ms", &dt_value)) {
> + if (dt_value > 2550) {
> + dev_err(dev, "touch-timeout-ms (%u) must be [0-2550]\n",
> + dt_value);
> + return ERR_PTR(-EINVAL);
> + }
> + /* Register value is expressed in 0.01s / bit */
> + pdata->tch_tmout = (u8)(dt_value/10);

Spaces around operations please. Do we need explicit cast here?

> + }
> +
> + return pdata;
> +}
> +#else
> +static const struct cyttsp_platform_data *cyttsp_parse_dt(struct device *dev)
> +{
> + return ERR_PTR(-ENOENT);
> +}
> +#endif
> +
> +static const struct cyttsp_platform_data *
> +cyttsp_get_platform_data(struct device *dev)
> +{
> + const struct cyttsp_platform_data *pdata;
> +
> + pdata = dev_get_platdata(dev);
> + if (pdata)
> + return pdata;
> +
> + pdata = cyttsp_parse_dt(dev);
> + if (!IS_ERR(pdata) || PTR_ERR(pdata) != -ENOENT)
> + return pdata;
> +
> + dev_err(dev, "No platform data specified\n");
> + return ERR_PTR(-EINVAL);
> +}
> +
> struct cyttsp *cyttsp_probe(const struct cyttsp_bus_ops *bus_ops,
> struct device *dev, int irq, size_t xfer_buf_size)
> {
> - const struct cyttsp_platform_data *pdata = dev_get_platdata(dev);
> + const struct cyttsp_platform_data *pdata;
> struct cyttsp *ts;
> struct input_dev *input_dev;
> int error;
>
> - if (!pdata || !pdata->name || irq <= 0) {
> - error = -EINVAL;
> - goto err_out;
> - }
> + pdata = cyttsp_get_platform_data(dev);
> + if (IS_ERR(pdata))
> + return ERR_CAST(pdata);
>
> ts = kzalloc(sizeof(*ts) + xfer_buf_size, GFP_KERNEL);
> input_dev = input_allocate_device();
> @@ -550,7 +671,7 @@ struct cyttsp *cyttsp_probe(const struct cyttsp_bus_ops *bus_ops,
>
> ts->dev = dev;
> ts->input = input_dev;
> - ts->pdata = dev_get_platdata(dev);
> + ts->pdata = pdata;
> ts->bus_ops = bus_ops;
> ts->irq = irq;
>
> @@ -618,7 +739,6 @@ err_platform_exit:
> err_free_mem:
> input_free_device(input_dev);
> kfree(ts);
> -err_out:
> return ERR_PTR(error);
> }
> EXPORT_SYMBOL_GPL(cyttsp_probe);
> diff --git a/include/linux/input/cyttsp.h b/include/linux/input/cyttsp.h
> index d7c2520..92a9d52 100644
> --- a/include/linux/input/cyttsp.h
> +++ b/include/linux/input/cyttsp.h
> @@ -29,6 +29,8 @@
> #ifndef _CYTTSP_H_
> #define _CYTTSP_H_
>
> +#include <linux/gpio/consumer.h>
> +
> #define CY_SPI_NAME "cyttsp-spi"
> #define CY_I2C_NAME "cyttsp-i2c"
> /* Active Power state scanning/processing refresh interval */
> @@ -51,6 +53,7 @@ struct cyttsp_platform_data {
> int (*init)(void);
> void (*exit)(void);
> char *name;
> + struct gpio_desc *reset_gpio;

No, we shoudl not be passing gpio descriptor in platform data. For
non-of non-ACPI system gpiod_* framework allows boards to specify lookup
tables so they can use that. Just drop it form here.

> u8 *bl_keys;
> };
>
> --
> 1.9.1
>

Thanks.

--
Dmitry

\
 
 \ /
  Last update: 2016-01-11 19:41    [W:0.130 / U:0.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site