lkml.org 
[lkml]   [2015]   [Sep]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] mmc: pwrseq_simple: use GPIO descriptors array API
Date
The simple power sequence provider sets a value for multiple GPIOs in one
go so it is better to use the API already provided by the GPIO descriptor
API instead of open coding the same logic.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>

---

drivers/mmc/core/pwrseq_simple.c | 45 ++++++++++++++--------------------------
1 file changed, 15 insertions(+), 30 deletions(-)

diff --git a/drivers/mmc/core/pwrseq_simple.c b/drivers/mmc/core/pwrseq_simple.c
index 0b14b83a53d6..d10538bb5e07 100644
--- a/drivers/mmc/core/pwrseq_simple.c
+++ b/drivers/mmc/core/pwrseq_simple.c
@@ -23,18 +23,21 @@ struct mmc_pwrseq_simple {
struct mmc_pwrseq pwrseq;
bool clk_enabled;
struct clk *ext_clk;
- int nr_gpios;
- struct gpio_desc *reset_gpios[0];
+ struct gpio_descs *reset_gpios;
};

static void mmc_pwrseq_simple_set_gpios_value(struct mmc_pwrseq_simple *pwrseq,
int value)
{
int i;
+ struct gpio_descs *reset_gpios = pwrseq->reset_gpios;
+ int values[reset_gpios->ndescs];

- for (i = 0; i < pwrseq->nr_gpios; i++)
- if (!IS_ERR(pwrseq->reset_gpios[i]))
- gpiod_set_value_cansleep(pwrseq->reset_gpios[i], value);
+ for (i = 0; i < reset_gpios->ndescs; i++)
+ values[i] = value;
+
+ gpiod_set_array_value_cansleep(reset_gpios->ndescs, reset_gpios->desc,
+ values);
}

static void mmc_pwrseq_simple_pre_power_on(struct mmc_host *host)
@@ -75,11 +78,8 @@ static void mmc_pwrseq_simple_free(struct mmc_host *host)
{
struct mmc_pwrseq_simple *pwrseq = container_of(host->pwrseq,
struct mmc_pwrseq_simple, pwrseq);
- int i;

- for (i = 0; i < pwrseq->nr_gpios; i++)
- if (!IS_ERR(pwrseq->reset_gpios[i]))
- gpiod_put(pwrseq->reset_gpios[i]);
+ gpiod_put_array(pwrseq->reset_gpios);

if (!IS_ERR(pwrseq->ext_clk))
clk_put(pwrseq->ext_clk);
@@ -98,14 +98,9 @@ struct mmc_pwrseq *mmc_pwrseq_simple_alloc(struct mmc_host *host,
struct device *dev)
{
struct mmc_pwrseq_simple *pwrseq;
- int i, nr_gpios, ret = 0;
-
- nr_gpios = of_gpio_named_count(dev->of_node, "reset-gpios");
- if (nr_gpios < 0)
- nr_gpios = 0;
+ int ret = 0;

- pwrseq = kzalloc(sizeof(struct mmc_pwrseq_simple) + nr_gpios *
- sizeof(struct gpio_desc *), GFP_KERNEL);
+ pwrseq = kzalloc(sizeof(*pwrseq), GFP_KERNEL);
if (!pwrseq)
return ERR_PTR(-ENOMEM);

@@ -116,22 +111,12 @@ struct mmc_pwrseq *mmc_pwrseq_simple_alloc(struct mmc_host *host,
goto free;
}

- for (i = 0; i < nr_gpios; i++) {
- pwrseq->reset_gpios[i] = gpiod_get_index(dev, "reset", i,
- GPIOD_OUT_HIGH);
- if (IS_ERR(pwrseq->reset_gpios[i]) &&
- PTR_ERR(pwrseq->reset_gpios[i]) != -ENOENT &&
- PTR_ERR(pwrseq->reset_gpios[i]) != -ENOSYS) {
- ret = PTR_ERR(pwrseq->reset_gpios[i]);
-
- while (i--)
- gpiod_put(pwrseq->reset_gpios[i]);
-
- goto clk_put;
- }
+ pwrseq->reset_gpios = gpiod_get_array(dev, "reset", GPIOD_OUT_HIGH);
+ if (IS_ERR(pwrseq->reset_gpios)) {
+ ret = PTR_ERR(pwrseq->reset_gpios);
+ goto clk_put;
}

- pwrseq->nr_gpios = nr_gpios;
pwrseq->pwrseq.ops = &mmc_pwrseq_simple_ops;

return &pwrseq->pwrseq;
--
2.4.3


\
 
 \ /
  Last update: 2015-09-21 14:41    [W:0.106 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site