lkml.org 
[lkml]   [2015]   [Aug]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [linux-sunxi] [PATCH v3 1/3] mmc: sunxi: fix timeout in sunxi_mmc_oclk_onoff
From
Date
Hi,

On 08/12/2015 03:29 PM, Michal Suchanek wrote:
> The 250ms timeout is too short.
>
> On my system enabling the oclk takes under 50ms and disabling slightly
> over 100ms when idle. Under load disabling the clock can take over
> 350ms.
>
> This does not make mmc clock gating look like good option to have on
> sunxi but the system should not crash with mmc clock gating enabled
> nonetheless.
>
> This patch sets the timeout to 750ms.
>
> Signed-off-by: Michal Suchanek <hramrach@gmail.com>
>
> ---
> v3
> - remove debug message

Thanks, this one looks good to me:

Acked-by: Hans de Goede <hdegoede@redhat.com>

Ulf, can you apply this one please?

Thanks & Regards,

Hans


> v2
> - fix formatting
> ---
> drivers/mmc/host/sunxi-mmc.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c
> index 4d3e1ff..a7b7a67 100644
> --- a/drivers/mmc/host/sunxi-mmc.c
> +++ b/drivers/mmc/host/sunxi-mmc.c
> @@ -595,7 +595,7 @@ static irqreturn_t sunxi_mmc_handle_manual_stop(int irq, void *dev_id)
>
> static int sunxi_mmc_oclk_onoff(struct sunxi_mmc_host *host, u32 oclk_en)
> {
> - unsigned long expire = jiffies + msecs_to_jiffies(250);
> + unsigned long expire = jiffies + msecs_to_jiffies(750);
> u32 rval;
>
> rval = mmc_readl(host, REG_CLKCR);
>


\
 
 \ /
  Last update: 2015-08-12 17:21    [W:0.039 / U:0.444 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site