lkml.org 
[lkml]   [2015]   [Jul]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.1 029/267] hid-sensor: Fix suspend/resume delay
Date
4.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>

commit 1e25aa9641e8f3fa39cd5e46b4afcafd7f12a44b upstream.

By default all the sensors are runtime suspended state (lowest power
state). During Linux suspend process, all the run time suspended
devices are resumed and then suspended. This caused all sensors to
power up and introduced delay in suspend time, when we introduced
runtime PM for HID sensors. The opposite process happens during resume
process.

To fix this, we do powerup process of the sensors only when the request
is issued from user (raw or tiggerred). In this way when runtime,
resume calls for powerup it will simply return as this will not match
user requested state.

Note this is a regression fix as the increase in suspend / resume
times can be substantial (report of 8 seconds on Len's laptop!)

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Tested-by: Len Brown <len.brown@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/iio/common/hid-sensors/hid-sensor-trigger.c | 11 ++++++++++-
include/linux/hid-sensor-hub.h | 1 +
2 files changed, 11 insertions(+), 1 deletion(-)

--- a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
+++ b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
@@ -36,6 +36,8 @@ static int _hid_sensor_power_state(struc
s32 poll_value = 0;

if (state) {
+ if (!atomic_read(&st->user_requested_state))
+ return 0;
if (sensor_hub_device_open(st->hsdev))
return -EIO;

@@ -52,8 +54,12 @@ static int _hid_sensor_power_state(struc

poll_value = hid_sensor_read_poll_value(st);
} else {
- if (!atomic_dec_and_test(&st->data_ready))
+ int val;
+
+ val = atomic_dec_if_positive(&st->data_ready);
+ if (val < 0)
return 0;
+
sensor_hub_device_close(st->hsdev);
state_val = hid_sensor_get_usage_index(st->hsdev,
st->power_state.report_id,
@@ -92,9 +98,11 @@ EXPORT_SYMBOL(hid_sensor_power_state);

int hid_sensor_power_state(struct hid_sensor_common *st, bool state)
{
+
#ifdef CONFIG_PM
int ret;

+ atomic_set(&st->user_requested_state, state);
if (state)
ret = pm_runtime_get_sync(&st->pdev->dev);
else {
@@ -109,6 +117,7 @@ int hid_sensor_power_state(struct hid_se

return 0;
#else
+ atomic_set(&st->user_requested_state, state);
return _hid_sensor_power_state(st, state);
#endif
}
--- a/include/linux/hid-sensor-hub.h
+++ b/include/linux/hid-sensor-hub.h
@@ -230,6 +230,7 @@ struct hid_sensor_common {
struct platform_device *pdev;
unsigned usage_id;
atomic_t data_ready;
+ atomic_t user_requested_state;
struct iio_trigger *trigger;
struct hid_sensor_hub_attribute_info poll;
struct hid_sensor_hub_attribute_info report_state;



\
 
 \ /
  Last update: 2015-08-01 00:21    [W:0.984 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site