lkml.org 
[lkml]   [2015]   [Jun]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] i8042: Add debug_kbd option
Date
From: Stephen Chandler Paul <cpaul@redhat.com>

A big problem with the current i8042 debugging option is that it outputs
data going to and from the keyboard by default. As a result, many dmesg
logs uploaded by users will unintentionally contain sensitive information
such as their password, as such it's probably a good idea not to output
data coming from the keyboard unless specifically enabled by the user.

Signed-off-by: Stephen Chandler Paul <cpaul@redhat.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
---
Documentation/kernel-parameters.txt | 7 +++++++
drivers/input/serio/i8042.c | 25 +++++++++++++++++++++----
2 files changed, 28 insertions(+), 4 deletions(-)

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index ae44749..9e00234 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1304,6 +1304,13 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
<bus_id>,<clkrate>

i8042.debug [HW] Toggle i8042 debug mode
+ i8042.debug_kbd [HW] Enable printing of interrupt data from the KBD port
+ As a side effect, this option will mask some of the
+ interrupts sent back from the keyboard during the
+ initialization of the KBD port on the i8042, if you
+ need to see this, you will need to enable this
+ option.
+ (disabled by default)
i8042.direct [HW] Put keyboard port into non-translated mode
i8042.dumbkbd [HW] Pretend that controller can only read data from
keyboard and cannot control its state
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index cb5ece7..084fc05 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -88,6 +88,23 @@ MODULE_PARM_DESC(nopnp, "Do not use PNP to detect controller settings");
static bool i8042_debug;
module_param_named(debug, i8042_debug, bool, 0600);
MODULE_PARM_DESC(debug, "Turn i8042 debugging mode on and off");
+
+static bool i8042_debug_kbd;
+module_param_named(debug_kbd, i8042_debug_kbd, bool, 0600);
+MODULE_PARM_DESC(i8042_kbd, "Turn i8042 kbd debugging output on or off");
+
+#define str_dbg(str, data, format, args...) \
+ do { \
+ if (!i8042_debug) \
+ break; \
+ \
+ if (str & I8042_STR_AUXDATA || i8042_debug_kbd) \
+ dbg("%02x " format, data, ##args); \
+ else \
+ dbg("** " format, ##args); \
+ } while (0)
+#else
+#define str_dbg(str, data, format, args...) do { } while (0)
#endif

static bool i8042_bypass_aux_irq_test;
@@ -528,10 +545,10 @@ static irqreturn_t i8042_interrupt(int irq, void *dev_id)
port = &i8042_ports[port_no];
serio = port->exists ? port->serio : NULL;

- dbg("%02x <- i8042 (interrupt, %d, %d%s%s)\n",
- data, port_no, irq,
- dfl & SERIO_PARITY ? ", bad parity" : "",
- dfl & SERIO_TIMEOUT ? ", timeout" : "");
+ str_dbg(str, data, "<- i8042 (interrupt, %d, %d%s%s)\n",
+ port_no, irq,
+ dfl & SERIO_PARITY ? ", bad parity" : "",
+ dfl & SERIO_TIMEOUT ? ", timeout" : "");

filtered = i8042_filter(data, str, serio);

--
2.4.3


\
 
 \ /
  Last update: 2015-06-25 21:41    [W:0.094 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site