lkml.org 
[lkml]   [2015]   [Jun]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v4 0/2] spi: atmel: add support to FIFOs and the internal chip-select
Date
ChangeLog

v4:
- remove the chip-select patch from the series as it has already been applied
- reword the commit message of the DT bindings patch to better explain why we
use a new DT property, "atmel,fifo-size" instead of relying on the VERSION
register or the "compatible" string.
- reword the commit message of the actual FIFO patch to better explain what
are the MULTIPLE and SINGLE data modes and how to use them properly.
- add Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>

v3:
- replace "Alternative Command Mode" by "Chip Select Active After Transfer" in
the DT bindings documentation. The "Alternative Command Mode" is a feature of
the I2C controller.
- rename somes "size" variables to "num_data" to ease the distinction between
the number of bytes and the number of data to transfer.

v2:
- read the Status Register to clear its RX FIFO Threshold Flag (RXFTHF) before
writing into the IER to enable the RXFTHF interrupt.
- remove the reset of the FIFO Mode Register (FMR) at the end of transfers
because setting the RX FIFO Threshold to 0 also sets the RXFTHF bit in SR.
- add a 3rd patch in the series to update the documentation of DT bindings.

v1:
This series of patches add support to features introduced by the Atmel sama5d2x
SoC

Cyrille Pitchen (2):
spi: atmel: update DT bindings documentation
spi: atmel: add support to FIFOs

.../devicetree/bindings/spi/spi_atmel.txt | 8 +-
drivers/spi/spi-atmel.c | 255 ++++++++++++++++++++-
2 files changed, 252 insertions(+), 11 deletions(-)

--
1.8.2.2



\
 
 \ /
  Last update: 2015-06-16 12:41    [W:0.025 / U:1.392 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site