lkml.org 
[lkml]   [2015]   [Feb]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 5/9] mtd: pxa3xx_nand: add support for the Marvell Berlin nand controller
On Tue, Jan 27, 2015 at 11:42:08AM -0300, Ezequiel Garcia wrote:
> On 01/27/2015 11:10 AM, Antoine Tenart wrote:
> > --- a/drivers/mtd/nand/pxa3xx_nand.c
> > +++ b/drivers/mtd/nand/pxa3xx_nand.c
...
> > @@ -244,10 +254,13 @@ module_param(use_dma, bool, 0444);
> > MODULE_PARM_DESC(use_dma, "enable DMA for data transferring to/from NAND HW");
> >
> > static struct pxa3xx_nand_timing timing[] = {
> > - { 40, 80, 60, 100, 80, 100, 90000, 400, 40, },
> > - { 10, 0, 20, 40, 30, 40, 11123, 110, 10, },
> > - { 10, 25, 15, 25, 15, 30, 25000, 60, 10, },
> > - { 10, 35, 15, 25, 15, 25, 25000, 60, 10, },
> > + { 40, 80, 60, 100, 80, 100, 90000, 400, 40, },
> > + { 10, 0, 20, 40, 30, 40, 11123, 110, 10, },
> > + { 10, 25, 15, 25, 15, 30, 25000, 60, 10, },
> > + { 10, 35, 15, 25, 15, 25, 25000, 60, 10, },
> > + { 5, 20, 10, 12, 10, 12, 60000, 60, 10, },
> > + { 5, 20, 10, 12, 10, 12, 200000, 120, 10, },
> > + { 5, 15, 10, 15, 10, 15, 60000, 60, 10, },
> > };
> >
> > static struct pxa3xx_nand_flash builtin_flash_types[] = {
> > @@ -260,6 +273,20 @@ static struct pxa3xx_nand_flash builtin_flash_types[] = {
> > { "512MiB 8-bit", 0xdc2c, 64, 2048, 8, 8, 4096, &timing[2] },
> > { "512MiB 16-bit", 0xcc2c, 64, 2048, 16, 16, 4096, &timing[2] },
> > { "256MiB 16-bit", 0xba20, 64, 2048, 16, 16, 2048, &timing[3] },
> > +{ },
> > +};
> > +
> > +static struct pxa3xx_nand_flash berlin_builtin_flash_types[] = {
> > +{ "2GiB 8-bit", 0xd5ec, 128, 8192, 8, 8, 2048, &timing[4] },
> > +{ "2GiB 8-bit", 0xd598, 128, 8192, 8, 8, 2048, &timing[5] },
> > +{ "2GiB 8-bit", 0x482c, 256, 4096, 8, 8, 2048, &timing[6] },
> > +{ "4GiB 8-bit", 0xd7ec, 128, 8192, 8, 8, 4096, &timing[5] },
> > +{ "8GiB 8-bit", 0xdeec, 128, 8192, 8, 8, 4096, &timing[5] },
> > +{ "4GiB 8-bit", 0xd7ad, 256, 8192, 8, 8, 2048, &timing[5] },
> > +{ "4GiB 8-bit", 0x682c, 256, 4096, 8, 8, 4096, &timing[6] },
> > +{ "8GiB 8-bit", 0x882c, 256, 8192, 8, 8, 4096, &timing[6] },
> > +{ "8GiB 8-bit", 0xdead, 256, 8192, 8, 8, 4096, &timing[6] },
> > +{ },
> > };
> >
>
> IMO, this sucks. I was hoping to see this old style probing go away,
> instead of be augmented.
>
> There are proper ways to set timings.

Agreed. I'm not taking any additions to this table. Please rewrite the
code to use the onfi_async_timing_mode_to_sdr_timings() helpers.

Brian


\
 
 \ /
  Last update: 2015-02-06 02:41    [W:0.194 / U:0.808 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site