lkml.org 
[lkml]   [2015]   [Feb]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 5/9] mtd: pxa3xx_nand: add support for the Marvell Berlin nand controller
Robert,

On Tue, Feb 10, 2015 at 08:50:41PM +0100, Robert Jarzmik wrote:
> Boris Brezillon <boris.brezillon@free-electrons.com> writes:
> > On Tue, 27 Jan 2015 15:10:12 +0100
> > Antoine Tenart <antoine.tenart@free-electrons.com> wrote:
> >
> >> The nand controller on Marvell Berlin SoC reuse the pxa3xx nand driver
> >> as it quite close. The process of sending commands can be compared to
> >> the one of the Marvell armada 370: read and write commands are done in
> >> chunks.
> >>
> >> But the Berlin nand controller has some other specificities which
> >> require some modifications of the pxa3xx nand driver:
> >> - there are no IRQ available so we need to poll the status register: we
> >> have to use our own cmdfunc Berlin function, and early on the probing
> >> function.
> >> - PAGEPROG are very different from the one used in the pxa3xx driver,
> >> so we're using a specific process for this one
> >> - the SEQIN command is equivalent to a READ0 command
> >> - the RNDOUT command must be used to perform a read operation, and the
> >> command is not NAND_CMD_RNDOUT
> >> - the ERASE1 command is specific (0xd060)
> >>
> >> Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
>
> Given all the differences, the PIO mode instead of the current interrupt model,
> and the berlin specific functions (nand_start, ...), wouldn't it be an idea to :
> - extract the common functions to mrvl-nand-lib.c
> - the remaining would be in pxa3xx_nand.c
> - the new code will be in berlin_nand.c
>
> All these ifs per variant will add complexity to the current driver, won't they
> ?

Given the current state of this driver I believe this would be a better
idea to first rework it to use the nand framework properly. Then it will
be possible to have a look on what we have, to decide whether or not a
mrvl-nand-lib is needed.

Antoine

--
Antoine Ténart, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com


\
 
 \ /
  Last update: 2015-02-11 17:41    [W:0.057 / U:0.572 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site