lkml.org 
[lkml]   [2015]   [Feb]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] mtd: nand: omap: drop condition with no effect
Date
The if and the else branch code are identical - so the condition has no
effect on the effective code. This patch removes the condition and the
duplicated code and updates the documentation as suggested by
Roger Quadros <rogerq@ti.com>.

Acked-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
---

v2: Confirmation of proposed patch and update of the related documentation
as provided by Roger Quadros <rogerq@ti.com>

The conditions in the OMAP_ECC_BCH8_CODE_HW_DETECTION_SW and
OMAP_ECC_BCH4_CODE_HW_DETECTION_SW case have no effect and can
be removed.

Patch was only compile tested with arm-linux-gnueabi-4.7-, current
crosstool-ng did not seem to build omap2 properly.
Config is omap2plus_defconfig which implies CONFIG_MTD_NAND_OMAP2=y.

Patch is against 3.19.0-rc7 (localversion-next is -next-20150204)

drivers/mtd/nand/omap2.c | 31 +++++++++----------------------
1 file changed, 9 insertions(+), 22 deletions(-)

diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index 63f858e..60fa899 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -1048,10 +1048,9 @@ static int omap_dev_ready(struct mtd_info *mtd)
* @mtd: MTD device structure
* @mode: Read/Write mode
*
- * When using BCH, sector size is hardcoded to 512 bytes.
- * Using wrapping mode 6 both for reading and writing if ELM module not uses
- * for error correction.
- * On writing,
+ * When using BCH with SW correction (i.e. no ELM), sector size is set
+ * to 512 bytes and we use BCH_WRAPMODE_6 wrapping mode
+ * for both reading and writing with:
* eccsize0 = 0 (no additional protected byte in spare area)
* eccsize1 = 32 (skip 32 nibbles = 16 bytes per sector in spare area)
*/
@@ -1071,15 +1070,9 @@ static void __maybe_unused omap_enable_hwecc_bch(struct mtd_info *mtd, int mode)
case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW:
bch_type = 0;
nsectors = 1;
- if (mode == NAND_ECC_READ) {
- wr_mode = BCH_WRAPMODE_6;
- ecc_size0 = BCH_ECC_SIZE0;
- ecc_size1 = BCH_ECC_SIZE1;
- } else {
- wr_mode = BCH_WRAPMODE_6;
- ecc_size0 = BCH_ECC_SIZE0;
- ecc_size1 = BCH_ECC_SIZE1;
- }
+ wr_mode = BCH_WRAPMODE_6;
+ ecc_size0 = BCH_ECC_SIZE0;
+ ecc_size1 = BCH_ECC_SIZE1;
break;
case OMAP_ECC_BCH4_CODE_HW:
bch_type = 0;
@@ -1097,15 +1090,9 @@ static void __maybe_unused omap_enable_hwecc_bch(struct mtd_info *mtd, int mode)
case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW:
bch_type = 1;
nsectors = 1;
- if (mode == NAND_ECC_READ) {
- wr_mode = BCH_WRAPMODE_6;
- ecc_size0 = BCH_ECC_SIZE0;
- ecc_size1 = BCH_ECC_SIZE1;
- } else {
- wr_mode = BCH_WRAPMODE_6;
- ecc_size0 = BCH_ECC_SIZE0;
- ecc_size1 = BCH_ECC_SIZE1;
- }
+ wr_mode = BCH_WRAPMODE_6;
+ ecc_size0 = BCH_ECC_SIZE0;
+ ecc_size1 = BCH_ECC_SIZE1;
break;
case OMAP_ECC_BCH8_CODE_HW:
bch_type = 1;
--
1.7.10.4


\
 
 \ /
  Last update: 2015-02-04 18:41    [W:0.041 / U:0.692 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site