lkml.org 
[lkml]   [2015]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH] spi/spi-fsl-espi.c: Add spi cs polarity support
Add CS polarity flag to be able to set the CS polarity
via the DT property spi-cs-high.

Signed-off-by: Andreas Werner <andreas.werner@men.de>
---
drivers/spi/spi-fsl-espi.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-fsl-espi.c b/drivers/spi/spi-fsl-espi.c
index c27124a..2dc70953 100644
--- a/drivers/spi/spi-fsl-espi.c
+++ b/drivers/spi/spi-fsl-espi.c
@@ -495,7 +495,7 @@ static int fsl_espi_setup(struct spi_device *spi)
&reg_base->csmode[spi->chip_select]);
/* mask out bits we are going to set */
cs->hw_mode &= ~(CSMODE_CP_BEGIN_EDGECLK | CSMODE_CI_INACTIVEHIGH
- | CSMODE_REV);
+ | CSMODE_REV | CSMODE_POL_1);

if (spi->mode & SPI_CPHA)
cs->hw_mode |= CSMODE_CP_BEGIN_EDGECLK;
@@ -503,6 +503,8 @@ static int fsl_espi_setup(struct spi_device *spi)
cs->hw_mode |= CSMODE_CI_INACTIVEHIGH;
if (!(spi->mode & SPI_LSB_FIRST))
cs->hw_mode |= CSMODE_REV;
+ if (!(spi->mode & SPI_CS_HIGH))
+ cs->hw_mode |= CSMODE_POL_1;

/* Handle the loop mode */
loop_mode = mpc8xxx_spi_read_reg(&reg_base->mode);
--
2.6.2


\
 
 \ /
  Last update: 2015-12-07 08:21    [W:0.171 / U:0.520 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site