lkml.org 
[lkml]   [2015]   [Dec]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH v2] use callbacks to access UART_DLL/UART_DLM
---

Some UART HW has a single register combining UART_DLL/UART_DLM
(this was probably forgotten in the change that introduced the
callbacks, commit b32b19b8ffc05cbd3bf91c65e205f6a912ca15d9)

Fixes: b32b19b8ffc0

Signed-off-by: Sebastian Frias <sf84@laposte.net>
---
drivers/tty/serial/8250/8250_port.c | 17 ++++++-----------
1 file changed, 6 insertions(+), 11 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_port.c
b/drivers/tty/serial/8250/8250_port.c
index 52d82d2..827eb6f 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -713,22 +713,17 @@ static int size_fifo(struct uart_8250_port *up)
*/
static unsigned int autoconfig_read_divisor_id(struct uart_8250_port *p)
{
- unsigned char old_dll, old_dlm, old_lcr;
+ unsigned char old_lcr;
unsigned int id;
+ unsigned int old_dl;

old_lcr = serial_in(p, UART_LCR);
serial_out(p, UART_LCR, UART_LCR_CONF_MODE_A);
+ old_dl = serial_dl_read(p);
+ serial_dl_write(p, 0);
+ id = serial_dl_read(p);
+ serial_dl_write(p, old_dl);

- old_dll = serial_in(p, UART_DLL);
- old_dlm = serial_in(p, UART_DLM);
-
- serial_out(p, UART_DLL, 0);
- serial_out(p, UART_DLM, 0);
-
- id = serial_in(p, UART_DLL) | serial_in(p, UART_DLM) << 8;
-
- serial_out(p, UART_DLL, old_dll);
- serial_out(p, UART_DLM, old_dlm);
serial_out(p, UART_LCR, old_lcr);

return id;
--
1.7.10.4

\
 
 \ /
  Last update: 2015-12-18 12:21    [W:0.099 / U:2.448 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site