lkml.org 
[lkml]   [2015]   [Dec]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] use callbacks to access UART_DLL/UART_DLM
Date
Sebastian Frias <sf84@laposte.net> writes:

> ---
> resending as plain-text
> ---
> drivers/tty/serial/8250/8250_core.c | 17 +++++++----------
> 1 file changed, 7 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/tty/serial/8250/8250_core.c
> b/drivers/tty/serial/8250/8250_core.c
> index 2c46a21..9ca863c 100644
> --- a/drivers/tty/serial/8250/8250_core.c
> +++ b/drivers/tty/serial/8250/8250_core.c
> @@ -791,22 +791,19 @@ static int size_fifo(struct uart_8250_port *up)
> */
> static unsigned int autoconfig_read_divisor_id(struct uart_8250_port *p)

What tree are you working against? Current mainline has that function
in 8250_port.c.

> {
> - unsigned char old_dll, old_dlm, old_lcr;
> + unsigned char old_lcr;
> unsigned int id;
> + unsigned int old_dl;

Your patch is messed up. Consider using "git send-email" instead.

> old_lcr = serial_in(p, UART_LCR);
> - serial_out(p, UART_LCR, UART_LCR_CONF_MODE_A);
> -
> - old_dll = serial_in(p, UART_DLL);
> - old_dlm = serial_in(p, UART_DLM);
>
> - serial_out(p, UART_DLL, 0);
> - serial_out(p, UART_DLM, 0);
> + serial_out(p, UART_LCR, UART_LCR_CONF_MODE_A);
>
> - id = serial_in(p, UART_DLL) | serial_in(p, UART_DLM) << 8;
> + old_dl = serial_dl_read(p);
> + serial_dl_write(p, 0);
> + id = serial_dl_read(p);
> + serial_dl_write(p, old_dl);
>
> - serial_out(p, UART_DLL, old_dll);
> - serial_out(p, UART_DLM, old_dlm);
> serial_out(p, UART_LCR, old_lcr);
>
> return id;
> --

If you left the blank lines alone, the patch would end up much easier to
understand. In this diff, some of the lines listed as added or removed
have actually not changed, and that's not immediately obvious.

--
Måns Rullgård


\
 
 \ /
  Last update: 2015-12-17 17:21    [W:0.130 / U:0.616 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site