lkml.org 
[lkml]   [2015]   [Dec]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5] rtc: support DS1302 RTC on ICP DAS LP-8x4x
Date
Signed-off-by: Sergei Ianovich <ynvich@gmail.com>
CC: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
v4..v5
* drop THIS_MODULE from struct platform driver
* use "dallas" for vendor name per vendor-prefixes.txt

v3..v4
* move DTS bindings to a different patch

v2..v3
* use usleep_range instead of custom nsleep
* number change (07/16 -> 09/21)

v0..v2
* use device tree
* use devm helpers where possible

.../devicetree/bindings/rtc/rtc-ds1302.txt | 14 +++
drivers/rtc/Kconfig | 2 +-
drivers/rtc/rtc-ds1302.c | 100 ++++++++++++++++++++-
3 files changed, 113 insertions(+), 3 deletions(-)
create mode 100644 Documentation/devicetree/bindings/rtc/rtc-ds1302.txt

diff --git a/Documentation/devicetree/bindings/rtc/rtc-ds1302.txt b/Documentation/devicetree/bindings/rtc/rtc-ds1302.txt
new file mode 100644
index 0000000..810613b
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/rtc-ds1302.txt
@@ -0,0 +1,14 @@
+* Dallas Semiconductor DS-1302 RTC
+
+Simple device which could be used to store date/time between reboots.
+
+Required properties:
+- compatible : Should be "dallas,rtc-ds1302"
+- reg : Should be address and size of IO memory region
+
+Examples:
+
+rtc@40900000 {
+ compatible = "dallas,rtc-ds1302";
+ reg = <0x1700901c 0x1>;
+};
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 2a52424..cf36483 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -803,7 +803,7 @@ config RTC_DRV_DS1286

config RTC_DRV_DS1302
tristate "Dallas DS1302"
- depends on SH_SECUREEDGE5410
+ depends on SH_SECUREEDGE5410 || (ARCH_PXA && HIGH_RES_TIMERS)
help
If you say yes here you get support for the Dallas DS1302 RTC chips.

diff --git a/drivers/rtc/rtc-ds1302.c b/drivers/rtc/rtc-ds1302.c
index 6bef7a5..bd68214 100644
--- a/drivers/rtc/rtc-ds1302.c
+++ b/drivers/rtc/rtc-ds1302.c
@@ -50,7 +50,7 @@
#define ds1302_set_tx()
#define ds1302_set_rx()

-static inline int ds1302_hw_init(void)
+static inline int ds1302_hw_init(struct platform_device *pdev)
{
return 0;
}
@@ -86,6 +86,101 @@ static inline int ds1302_rxbit(void)
return !!(get_dp() & RTC_IODATA);
}

+#elif defined(CONFIG_ARCH_PXA) && defined(CONFIG_HIGH_RES_TIMERS)
+
+#include <linux/delay.h>
+#include <linux/of.h>
+
+#define RTC_CE 0x01
+#define RTC_CLK 0x02
+#define RTC_nWE 0x04
+#define RTC_IODATA 0x08
+
+static unsigned long ds1302_state;
+
+static void *mem;
+
+static inline int ds1302_hw_init(struct platform_device *pdev)
+{
+ struct resource *r;
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!r)
+ return -ENODEV;
+
+ mem = devm_ioremap_resource(&pdev->dev, r);
+ if (!mem)
+ return -EFAULT;
+
+ return 0;
+}
+
+static inline void ds1302_reset(void)
+{
+ ds1302_state = 0;
+ iowrite8(ds1302_state, mem);
+ usleep_range(4, 5);
+}
+
+static inline void ds1302_clock(void)
+{
+ usleep_range(1, 2);
+ ds1302_state |= RTC_CLK;
+ iowrite8(ds1302_state, mem);
+ usleep_range(1, 2);
+ ds1302_state &= ~RTC_CLK;
+ iowrite8(ds1302_state, mem);
+}
+
+static inline void ds1302_start(void)
+{
+ ds1302_state &= ~RTC_CLK;
+ ds1302_state |= RTC_CE;
+ iowrite8(ds1302_state, mem);
+ usleep_range(3, 4);
+}
+
+static inline void ds1302_stop(void)
+{
+ ds1302_state &= ~RTC_CE;
+ iowrite8(ds1302_state, mem);
+}
+
+static inline void ds1302_set_tx(void)
+{
+ ds1302_state &= ~RTC_nWE;
+ iowrite8(ds1302_state, mem);
+}
+
+static inline void ds1302_set_rx(void)
+{
+ ds1302_state |= RTC_nWE;
+ iowrite8(ds1302_state, mem);
+}
+
+static inline void ds1302_txbit(int bit)
+{
+ if (bit)
+ ds1302_state |= RTC_IODATA;
+ else
+ ds1302_state &= ~RTC_IODATA;
+ iowrite8(ds1302_state, mem);
+}
+
+static inline int ds1302_rxbit(void)
+{
+ return ioread8(mem) & 0x1;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id ds1302_dt_ids[] = {
+ { .compatible = "dallas,rtc-ds1302" },
+ { }
+};
+
+MODULE_DEVICE_TABLE(of, ds1302_dt_ids);
+#endif
+
#else
#error "Add support for your platform"
#endif
@@ -216,7 +311,7 @@ static int __init ds1302_rtc_probe(struct platform_device *pdev)
{
struct rtc_device *rtc;

- if (ds1302_hw_init()) {
+ if (ds1302_hw_init(pdev)) {
dev_err(&pdev->dev, "Failed to init communication channel");
return -EINVAL;
}
@@ -244,6 +339,7 @@ static int __init ds1302_rtc_probe(struct platform_device *pdev)
static struct platform_driver ds1302_platform_driver = {
.driver = {
.name = DRV_NAME,
+ .of_match_table = of_match_ptr(ds1302_dt_ids),
},
};

--
2.6.2


\
 
 \ /
  Last update: 2015-12-15 19:01    [W:0.221 / U:0.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site