lkml.org 
[lkml]   [2015]   [Nov]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V2] clocksource/drivers/tango-xtal: Replace code by clocksource_mmio_init
Date
The current code to initialize, register and read the clocksource is
already factored out in mmio.c via the clocksource_mmio_init function.

Factor out the code with the clocksource_mmio_init function.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
drivers/clocksource/Kconfig | 1 +
drivers/clocksource/tango_xtal.c | 18 +++---------------
2 files changed, 4 insertions(+), 15 deletions(-)

diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index ecf9855..6969696 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -333,6 +333,7 @@ config CLKSRC_TANGO_XTAL
bool "Clocksource for Tango SoC" if COMPILE_TEST
depends on ARM
select CLKSRC_OF
+ select CLKSRC_MMIO
help
This enables the clocksource for Tango SoC

diff --git a/drivers/clocksource/tango_xtal.c b/drivers/clocksource/tango_xtal.c
index d297b30..2bcecaf 100644
--- a/drivers/clocksource/tango_xtal.c
+++ b/drivers/clocksource/tango_xtal.c
@@ -19,19 +19,6 @@ static u64 notrace read_sched_clock(void)
return read_xtal_counter();
}

-static cycle_t read_clocksource(struct clocksource *cs)
-{
- return read_xtal_counter();
-}
-
-static struct clocksource tango_xtal = {
- .name = "tango-xtal",
- .rating = 350,
- .read = read_clocksource,
- .mask = CLOCKSOURCE_MASK(32),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
static void __init tango_clocksource_init(struct device_node *np)
{
struct clk *clk;
@@ -53,8 +40,9 @@ static void __init tango_clocksource_init(struct device_node *np)
delay_timer.freq = xtal_freq;
delay_timer.read_current_timer = read_xtal_counter;

- ret = clocksource_register_hz(&tango_xtal, xtal_freq);
- if (ret != 0) {
+ ret = clocksource_mmio_init(xtal_in_cnt, "tango-xtal", xtal_freq, 350,
+ 32, clocksource_mmio_readl_up);
+ if (!ret) {
pr_err("%s: registration failed\n", np->full_name);
return;
}
--
1.9.1


\
 
 \ /
  Last update: 2015-11-13 15:41    [W:1.134 / U:0.964 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site