lkml.org 
[lkml]   [2015]   [Oct]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 1/2] devicetree: add binding for Aurora VLSI NB8800 Ethernet controller
Date
This adds a binding for the Aurora VLSI NB8800 Ethernet controller
using the "aurora,nb8800" compatible string. When used in Sigma
Designs chips a few additional features are available. These variants
are indicated by a "sigma,<chip>-ethernet" compatible string.

Signed-off-by: Mans Rullgard <mans@mansr.com>
---
Changes:
- added phy child node
---
.../devicetree/bindings/net/aurora,nb8800.txt | 37 ++++++++++++++++++++++
1 file changed, 37 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/aurora,nb8800.txt

diff --git a/Documentation/devicetree/bindings/net/aurora,nb8800.txt b/Documentation/devicetree/bindings/net/aurora,nb8800.txt
new file mode 100644
index 0000000..df12ff1
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/aurora,nb8800.txt
@@ -0,0 +1,37 @@
+* Aurora VLSI AU-NB8800 Ethernet controller
+
+Required properties:
+- compatible: Should be "sigma,<chip>-ethernet", "aurora,nb8800"
+- reg: Should be MMIO address space of the device
+- interrupts: Should contain the interrupt specifier for the device
+- interrupt-parent: Should be a phandle for the interrupt controller
+- clocks: Should be a phandle for the clock for the device
+- #address-cells: Should be <1>
+- #size-cells: Should be <0>
+
+Common properties described in ethernet.txt:
+- local-mac-address
+- mac-address
+- phy-handle
+- phy-mode
+
+The attached PHY should be specified in a child node as per phy.txt.
+
+Example:
+
+ethernet@26000 {
+ compatible = "sigma,smp8642-ethernet", "aurora,nb8800";
+ reg = <0x26000 0x800>;
+ interrupts = <38>;
+ clocks = <&sys_clk>;
+ max-speed = <1000>;
+ phy-connection-type = "rgmii";
+ phy-handle = <&eth0_phy>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eth0_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+};
--
2.6.2


\
 
 \ /
  Last update: 2015-10-26 23:01    [W:0.051 / U:0.460 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site