lkml.org 
[lkml]   [2015]   [Oct]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v2] ASoC: wm9713: convert to regmap
Date
Charles Keepax <ckeepax@opensource.wolfsonmicro.com> writes:

> On Sat, Oct 24, 2015 at 11:37:07PM +0200, Robert Jarzmik wrote:
>> Convert the Wolfson WM9713 to regmap API. This will leverage all the
>> regmap functions (debug, registers update, etc ...).
>>
>> As a bonus, this will pave the path to gpio chip introduction, and
>> devicetree support.
>>
>> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
>> ---
>> Since v1: fix suspend/resume (that specific part is not tested yet)
>> ---
>> sound/soc/codecs/Kconfig | 1 +
>> sound/soc/codecs/wm9713.c | 296 +++++++++++++++++++++++-----------------------
>> 2 files changed, 152 insertions(+), 145 deletions(-)
> <snip>
>> @@ -1156,16 +1165,17 @@ static int wm9713_set_bias_level(struct snd_soc_codec *codec,
>>
>> static int wm9713_soc_suspend(struct snd_soc_codec *codec)
>> {
>> - u16 reg;
>> + regcache_cache_only(codec->component.regmap, true);
>> + snd_soc_cache_sync(codec);
>
> I am assuming we don't want to be doing a cache_sync just after we
> have marked the regmap as cache only.
Ah, this denotes my lack of understanding of regmap cache behavior.
Basically what I want at this point is that :
1) All previous writes should hit the cache (cache coherency barrier)
2) All subsequent writes should not go into the cache (uncached writes)
=> especially the next writes in wm9713_soc_suspend()

>> + snd_soc_update_bits(codec, AC97_EXTENDED_MID, 0x7fff,
>> + 0x7fff);
>> + snd_soc_write(codec, AC97_EXTENDED_MSTATUS, 0xffff);
>> + snd_soc_write(codec, AC97_POWERDOWN, 0x6f00);
>> + snd_soc_write(codec, AC97_POWERDOWN, 0xffff);
>
> Also as you have already marked the regmap as cache only these
> writes won't go to the hardware.
Ah, exactly the opposite of what I wanted :(

Would you have an example driver I can inspire myself from. If not, I'll dig in
more in the regmap cache API.

Cheers.

--
Robert


\
 
 \ /
  Last update: 2015-10-26 19:21    [W:0.061 / U:0.516 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site