lkml.org 
[lkml]   [2015]   [Jan]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 09/11] ARM: tegra: Use pwrseq-simple for the wifi in Nyan
Date
The Nyan boards have a Marvell 88w8897 wifi card connected through SDIO
that need the reset line to be hold active for several milliseconds.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
---
arch/arm/boot/dts/tegra124-nyan.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi
index 25bbcbe..dbaf261f 100644
--- a/arch/arm/boot/dts/tegra124-nyan.dtsi
+++ b/arch/arm/boot/dts/tegra124-nyan.dtsi
@@ -365,11 +365,19 @@
status = "okay";
};

+ sdhci0_pwrseq: sdhci0_pwrseq {
+ compatible = "mmc,pwrseq-simple";
+
+ reset-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
+ delay = <20>; /* ms */
+ };
+
sdhci@0,700b0000 { /* WiFi/BT on this bus */
status = "okay";
bus-width = <4>;
no-1-8-v;
non-removable;
+ mmc-pwrseq = <&sdhci0_pwrseq>;
};

sdhci@0,700b0400 { /* SD Card on this bus */
--
1.9.3


\
 
 \ /
  Last update: 2015-01-15 17:21    [W:0.323 / U:0.440 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site