Messages in this thread | | | From | Stefan Agner <> | Subject | [PATCH v2 0/5] vf610: Add GPIO support | Date | Tue, 23 Sep 2014 19:37:52 +0200 |
| |
These include the review of Linus and Bill. I also added a patch creating the Documentation for the GPIO/PORT module (altough, the device tree bindings are already in use and not part this patch). Then there is a small extension to Colibri VF61 device tree, and because of that change I refrained to add Linus Acked-By to the DTS patch. Linus, if you agree, can you send the Ack for that patch again?
Changes in v2: - Use bit operations in GPIO driver - Use VF610_ prefix for GPIOS_PER_PORT define - Drop irq in drivers struct - Use arch/subsys_initicall for GPIO/pinctrl driver - Fix log message title - Add documentation for GPIO/PORT module bindings - Extended GPIO device tree bindings for Colibri VF61
Stefan Agner (5): pinctrl: imx: detect uninitialized pins pinctrl: imx: add gpio pinmux support for vf610 gpio: vf610: add gpiolib/IRQ chip driver for Vybrid ARM: dts: vf610: use new GPIO support Documentation: dts: Add bindings for Vybrid GPIO/PORT module
.../devicetree/bindings/gpio/gpio-vf610.txt | 56 ++++ arch/arm/boot/dts/vf610-colibri-eval-v3.dts | 5 + arch/arm/boot/dts/vf610-colibri.dtsi | 19 ++ arch/arm/boot/dts/vf610-twr.dts | 1 + arch/arm/boot/dts/vf610.dtsi | 1 + drivers/gpio/Kconfig | 7 + drivers/gpio/Makefile | 1 + drivers/gpio/gpio-vf610.c | 284 +++++++++++++++++++++ drivers/pinctrl/pinctrl-imx.c | 63 ++++- drivers/pinctrl/pinctrl-imx.h | 8 +- drivers/pinctrl/pinctrl-vf610.c | 2 +- 11 files changed, 438 insertions(+), 9 deletions(-) create mode 100644 Documentation/devicetree/bindings/gpio/gpio-vf610.txt create mode 100644 drivers/gpio/gpio-vf610.c
-- 2.1.0
| |