lkml.org 
[lkml]   [2014]   [Sep]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/5] clk: at91: fix USB clk support on at91rm9200/sam9 SoCs
Date
Hi,

This patch series fixes several bugs in the PLL driver preventing a proper
set_rate on the PLL clk.
It also enables propagation of set_rate request on the USB clk in order to
configure the PLL rate according to the USB block requirement (48 MHz).

Note that existing kernels, relying on the PLL configuration made by the
the bootloader should not be impacted by this bug, but others (those
directly booting from at91bootstrap or not enabling USB support in the
bootloader) will be.

This bug was reported by Gaël, who's directly booting the kernel from the
bootstrap.

Best Regards,

Boris

Boris BREZILLON (5):
clk: at91: fix PLL_MAX_COUNT macro definition
clk: at91: rework PLL rate calculation
clk: at91: fix recalc_rate implementation of PLL driver
clk: at91: rework rm9200 USB clock to propagate set_rate to the parent
clk
clk: at91: fix div by zero in USB clock driver

drivers/clk/at91/clk-pll.c | 160 +++++++++++++++++++++++----------------------
drivers/clk/at91/clk-usb.c | 20 ++++--
2 files changed, 96 insertions(+), 84 deletions(-)

--
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2014-09-02 10:21    [W:0.178 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site