lkml.org 
[lkml]   [2014]   [Aug]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v6 09/10] ARM: dts: Simplify USB3503 on exynos5250-arndale
Date
There's no need for a simple-bus, place the smsc,usb3503a directly into
the root node. That's what we're going to do on exynos5250-spring.

Reported-by: Tomasz Figa <t.figa@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
v5 -> v6: Unchanged

v5: New
Aligns with Spring's new USB3503 node.

arch/arm/boot/dts/exynos5250-arndale.dts | 16 +++++-----------
1 file changed, 5 insertions(+), 11 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index cc8b9ffeecc1..b231bcff7403 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -108,18 +108,12 @@
};
};

- usb_hub_bus {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
+ // SMSC USB3503 connected in hardware only mode as a PHY
+ usb_hub: usb-hub {
+ compatible = "smsc,usb3503a";

- // SMSC USB3503 connected in hardware only mode as a PHY
- usb_hub: usb_hub {
- compatible = "smsc,usb3503a";
-
- reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
- connect-gpios = <&gpd1 7 GPIO_ACTIVE_LOW>;
- };
+ reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
+ connect-gpios = <&gpd1 7 GPIO_ACTIVE_LOW>;
};
};

--
1.9.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2014-08-02 03:21    [W:0.032 / U:0.340 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site