lkml.org 
[lkml]   [2014]   [Jul]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCHv2 0/6] Add a driver for the atmel ram controller
Date
The atmel ram controller needs one or more clocks to work. For now the
CLK_IGNORE_UNUSED flag is used on those clocks. This patch set introduce a
driver that will take care of taking those clocks.

The final goal is also to move the ioremap done in mach-at91 to that driver with
a proper power management driver.

Changes in v2:
- use ATMEL_SDRAMC instead of ATMEL_RAMC
- use "atmel,sama5d3-ddramc" instead of "atmel,sama5d3-mpddramc"
- not getting mpddrck is now an error
- handle "atmel,sama5d3-ddramc" in mach-at91/setup.c

Alexandre Belloni (6):
ARM: at91: Add new binding for sama5d3-ddramc
memory: add a driver for atmel ram controllers
ARM: at91: select ATMEL_SDRAMC when using OF
ARM: at91/dt: sama5d3: define mpddr clock and ramc clocks
ARM: at91/dt: at91sam9: use ddrck in ramc
clk: at91: remove the useless CLK_IGNORE_UNUSED flag

.../devicetree/bindings/arm/atmel-at91.txt | 1 +
arch/arm/boot/dts/at91sam9n12.dtsi | 2 +
arch/arm/boot/dts/at91sam9x5.dtsi | 2 +
arch/arm/boot/dts/sama5d3.dtsi | 9 +-
arch/arm/mach-at91/Kconfig | 4 +
arch/arm/mach-at91/setup.c | 1 +
drivers/clk/at91/clk-system.c | 8 +-
drivers/memory/Kconfig | 10 +++
drivers/memory/Makefile | 1 +
drivers/memory/atmel-sdramc.c | 98 ++++++++++++++++++++++
10 files changed, 128 insertions(+), 8 deletions(-)
create mode 100644 drivers/memory/atmel-sdramc.c

--
1.9.1



\
 
 \ /
  Last update: 2014-07-08 19:41    [W:0.613 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site