lkml.org 
[lkml]   [2014]   [Jul]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 0/4] ARM: vf610: add FlexCAN support
On Mon, Jul 14, 2014 at 10:09:54AM +0200, Marc Kleine-Budde wrote:
> On 07/14/2014 09:48 AM, Stefan Agner wrote:
> > This series adds support for Vybrid (aka vf610) to the FlexCAN
> > controller and extends the device tree accordingly.
> >
> > Changes in v2:
> > - Split out patch (seperate dt, clocks and driver changes)
> > - Use spaces for hardware feature flags table
> > - Remove drive-by change of esdhc register length
> > - Added related fix which enables clock in berr_counter
> >
> > Stefan Agner (4):
> > ARM: dts: vf610: add FlexCAN node
> > ARM: imx: clk-vf610: fix FlexCAN clock gating
> > can: flexcan: switch on clocks before accessing ecr register
> > can: flexcan: add vf610 support for FlexCAN
> >
> > arch/arm/boot/dts/vf610.dtsi | 23 +++++++++++
> > arch/arm/mach-imx/clk-vf610.c | 6 ++-
> > drivers/net/can/flexcan.c | 89 ++++++++++++++++++++++++++++++++++++++-----
> > 3 files changed, 106 insertions(+), 12 deletions(-)
>
> Shawn, what's the best way to upstream this? With your Ack, I can take
> everything via linux-can-next.

Since this is a new support and there is nothing to maintain git bisect,
I think the best way is to have the first two patches to go via my tree.

Shawn


\
 
 \ /
  Last update: 2014-07-14 16:41    [W:0.216 / U:0.264 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site