Messages in this thread | | | Date | Mon, 14 Jul 2014 11:32:53 +0100 | From | Srinivas Kandagatla <> | Subject | Re: [PATCH v3 0/2] phy: qcom: Add driver for QCOM APQ8064 SATA PHY |
| |
On 14/07/14 11:30, Kishon Vijay Abraham I wrote: > > > On Monday 14 July 2014 02:17 PM, Srinivas Kandagatla wrote: >> Hi Kishon, >> >> First patch in this series adds support to the APQ8064 SATA PHY. >> Second patch updates the existing Kumar gala's device tree PHY bindings >> with APQ8064 soc specific compatible. >> >> Eventhough there are two seperate drivers for both IPQ and APQ SOCs, >> the bindings are exactly same, so I did not create new bindings document. > > Er.. create a separate binding.
Ok, no issues. >> >> Could you please pick these patches for v3.17. > > Sure. please rebase to linux-phy next and re-send. I will do it.
thanks, srini > > Thanks > Kishon >> >> Changes since v2: >> - added usleep_range in poll timeout as discussed >> with Bartlomiej Zolnierkiewicz. >> - Added missing pdev_set_drvdata spotted by >> Bartlomiej Zolnierkiewicz >> >> Changes since v1: >> - included DT bindings in the series. >> >> Thanks, >> srini >> >> Srinivas Kandagatla (2): >> phy: qcom: Add driver for QCOM APQ8064 SATA PHY >> phy: qcom: Update APQ8064 PHY device tree bindings >> >> Documentation/devicetree/bindings/phy/qcom-phy.txt | 3 +- >> drivers/phy/Kconfig | 7 + >> drivers/phy/Makefile | 1 + >> drivers/phy/phy-qcom-apq8064-sata.c | 288 +++++++++++++++++++++ >> 4 files changed, 298 insertions(+), 1 deletion(-) >> create mode 100644 drivers/phy/phy-qcom-apq8064-sata.c >>
| |