lkml.org 
[lkml]   [2014]   [Jul]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 0/2] phy: qcom: Add driver for QCOM APQ8064 SATA PHY


On Monday 14 July 2014 02:17 PM, Srinivas Kandagatla wrote:
> Hi Kishon,
>
> First patch in this series adds support to the APQ8064 SATA PHY.
> Second patch updates the existing Kumar gala's device tree PHY bindings
> with APQ8064 soc specific compatible.
>
> Eventhough there are two seperate drivers for both IPQ and APQ SOCs,
> the bindings are exactly same, so I did not create new bindings document.

Er.. create a separate binding.
>
> Could you please pick these patches for v3.17.

Sure. please rebase to linux-phy next and re-send.

Thanks
Kishon
>
> Changes since v2:
> - added usleep_range in poll timeout as discussed
> with Bartlomiej Zolnierkiewicz.
> - Added missing pdev_set_drvdata spotted by
> Bartlomiej Zolnierkiewicz
>
> Changes since v1:
> - included DT bindings in the series.
>
> Thanks,
> srini
>
> Srinivas Kandagatla (2):
> phy: qcom: Add driver for QCOM APQ8064 SATA PHY
> phy: qcom: Update APQ8064 PHY device tree bindings
>
> Documentation/devicetree/bindings/phy/qcom-phy.txt | 3 +-
> drivers/phy/Kconfig | 7 +
> drivers/phy/Makefile | 1 +
> drivers/phy/phy-qcom-apq8064-sata.c | 288 +++++++++++++++++++++
> 4 files changed, 298 insertions(+), 1 deletion(-)
> create mode 100644 drivers/phy/phy-qcom-apq8064-sata.c
>


\
 
 \ /
  Last update: 2014-07-14 13:21    [W:0.111 / U:0.572 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site