lkml.org 
[lkml]   [2014]   [Jun]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[boot regression PATCH] libata: allow xgene-ahci to opt-out of tag ordered submission
From
Date
Ming Lei reports:
"Looks the commit 8a4aeec8d(libata/ahci: accommodate tag ordered
controllers) causes below sata failure on APM AHCI controller.

And the error does disappear after reverting the commit.

ata4.00: exception Emask 0x40 SAct 0xff00 SErr 0x800 action 0x6 frozen
ata4: SError: { HostInt }
ata4.00: failed command: READ FPDMA QUEUED
ata4.00: cmd 60/08:40:e0:a4:88/00:00:04:00:00/40 tag 8 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x44 (timeout)"

http://marc.info/?l=linux-kernel&m=140195842716315&w=2

Maintain tag ordered submission as the default, but allow xgene-ahci to
continue with the old behavior.

Cc: Loc Ho <lho@apm.com>
Cc: <stable@vger.kernel.org>
Cc: Tuan Phan <tphan@apm.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Suman Tripathi <stripathi@apm.com>
Cc: Ed Ciechanowski <ed.ciechanowski@intel.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Tested-by: Ming Lei <ming.lei@canonical.com>
Reported-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
drivers/ata/ahci_xgene.c | 2 ++
drivers/ata/libata-core.c | 42 +++++++++++++++++++++++++++++++++++++++---
drivers/ata/libata.h | 2 ++
include/linux/libata.h | 1 +
4 files changed, 44 insertions(+), 3 deletions(-)

diff --git a/drivers/ata/ahci_xgene.c b/drivers/ata/ahci_xgene.c
index 77c89bf171f1..33de8d23de8a 100644
--- a/drivers/ata/ahci_xgene.c
+++ b/drivers/ata/ahci_xgene.c
@@ -28,6 +28,7 @@
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/phy/phy.h>
+#include "libata.h"
#include "ahci.h"

/* Max # of disk per a controller */
@@ -300,6 +301,7 @@ static struct ata_port_operations xgene_ahci_ops = {
.host_stop = xgene_ahci_host_stop,
.hardreset = xgene_ahci_hardreset,
.read_id = xgene_ahci_read_id,
+ .qc_new = ata_qc_new_fifo_order,
};

static const struct ata_port_info xgene_ahci_port_info = {
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 943cc8b83e59..dd554354791f 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -83,6 +83,7 @@ const struct ata_port_operations ata_base_port_ops = {
.error_handler = ata_std_error_handler,
.sched_eh = ata_std_sched_eh,
.end_eh = ata_std_end_eh,
+ .qc_new = ata_qc_new_tag_order,
};

const struct ata_port_operations sata_port_ops = {
@@ -4784,14 +4785,17 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words)
}

/**
- * ata_qc_new - Request an available ATA command, for queueing
+ * ata_qc_new_tag_order - Request an available ATA command, for queueing
* @ap: target port
*
+ * Accomodates controllers that issue commands in tag order rather
+ * than FIFO order (Intel AHCI).
+ *
* LOCKING:
* None.
*/

-static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap)
+struct ata_queued_cmd *ata_qc_new_tag_order(struct ata_port *ap)
{
struct ata_queued_cmd *qc = NULL;
unsigned int i, tag;
@@ -4819,6 +4823,38 @@ static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap)
}

/**
+ * ata_qc_new_fifo_order - Request an available ATA command, for queueing
+ * @ap: target port
+ *
+ * Allocate first available tag, for hosts that maintain fifo issue
+ * order on the wire, or otherwise cannot handle tag order.
+ *
+ * LOCKING:
+ * None.
+ */
+
+struct ata_queued_cmd *ata_qc_new_fifo_order(struct ata_port *ap)
+{
+ struct ata_queued_cmd *qc = NULL;
+ unsigned int i;
+
+ /* no command while frozen */
+ if (unlikely(ap->pflags & ATA_PFLAG_FROZEN))
+ return NULL;
+
+ /* the last tag is reserved for internal command. */
+ for (i = 0; i < ATA_MAX_QUEUE - 1; i++)
+ if (!test_and_set_bit(i, &ap->qc_allocated)) {
+ qc = __ata_qc_from_tag(ap, i);
+ qc->tag = i;
+ break;
+ }
+
+ return qc;
+}
+EXPORT_SYMBOL_GPL(ata_qc_new_fifo_order);
+
+/**
* ata_qc_new_init - Request an available ATA command, and initialize it
* @dev: Device from whom we request an available command structure
*
@@ -4831,7 +4867,7 @@ struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev)
struct ata_port *ap = dev->link->ap;
struct ata_queued_cmd *qc;

- qc = ata_qc_new(ap);
+ qc = ap->ops->qc_new(ap);
if (qc) {
qc->scsicmd = NULL;
qc->ap = ap;
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 45b5ab3a95d5..381ba41de464 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -90,6 +90,8 @@ extern int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel);
extern unsigned int ata_dev_set_feature(struct ata_device *dev,
u8 enable, u8 feature);
extern void ata_sg_clean(struct ata_queued_cmd *qc);
+extern struct ata_queued_cmd *ata_qc_new_tag_order(struct ata_port *ap);
+extern struct ata_queued_cmd *ata_qc_new_fifo_order(struct ata_port *ap);
extern void ata_qc_free(struct ata_queued_cmd *qc);
extern void ata_qc_issue(struct ata_queued_cmd *qc);
extern void __ata_qc_complete(struct ata_queued_cmd *qc);
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 5ab4e3a76721..852686837d1c 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -880,6 +880,7 @@ struct ata_port_operations {
void (*qc_prep)(struct ata_queued_cmd *qc);
unsigned int (*qc_issue)(struct ata_queued_cmd *qc);
bool (*qc_fill_rtf)(struct ata_queued_cmd *qc);
+ struct ata_queued_cmd *(*qc_new)(struct ata_port *ap);

/*
* Configuration and exception handling


\
 
 \ /
  Last update: 2014-06-06 18:21    [W:0.041 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site