lkml.org 
[lkml]   [2014]   [Jun]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] drm/msm/hdmi: set hdp clock rate before prepare_enable call
Date
The clock driver usually complains when a clock is being prepared
before setting its rate. It is the case here for "core_clk" which
needs to be set at 19.2 MHz before we attempt a prepare_enable().

Signed-off-by: Stephane Viau <sviau@codeaurora.org>
---
drivers/gpu/drm/msm/hdmi/hdmi.c | 2 ++
drivers/gpu/drm/msm/hdmi/hdmi.h | 1 +
drivers/gpu/drm/msm/hdmi/hdmi_connector.c | 8 ++++++++
3 files changed, 11 insertions(+)

diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.c b/drivers/gpu/drm/msm/hdmi/hdmi.c
index ae750f6..7f7aade 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.c
@@ -277,6 +277,7 @@ static int hdmi_bind(struct device *dev, struct device *master, void *data)
static const char *hpd_reg_names[] = {"hpd-gdsc", "hpd-5v"};
static const char *pwr_reg_names[] = {"core-vdda", "core-vcc"};
static const char *hpd_clk_names[] = {"iface_clk", "core_clk", "mdp_core_clk"};
+ static unsigned long hpd_clk_freq[] = {0, 19200000, 0};
static const char *pwr_clk_names[] = {"extp_clk", "alt_iface_clk"};

config.phy_init = hdmi_phy_8x74_init;
@@ -286,6 +287,7 @@ static int hdmi_bind(struct device *dev, struct device *master, void *data)
config.pwr_reg_names = pwr_reg_names;
config.pwr_reg_cnt = ARRAY_SIZE(pwr_reg_names);
config.hpd_clk_names = hpd_clk_names;
+ config.hpd_freq = hpd_clk_freq;
config.hpd_clk_cnt = ARRAY_SIZE(hpd_clk_names);
config.pwr_clk_names = pwr_clk_names;
config.pwr_clk_cnt = ARRAY_SIZE(pwr_clk_names);
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.h b/drivers/gpu/drm/msm/hdmi/hdmi.h
index 9fafee6..9d7723c 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.h
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.h
@@ -87,6 +87,7 @@ struct hdmi_platform_config {

/* clks that need to be on for hpd: */
const char **hpd_clk_names;
+ const long unsigned *hpd_freq;
int hpd_clk_cnt;

/* clks that need to be on for screen pwr (ie pixel clk): */
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_connector.c b/drivers/gpu/drm/msm/hdmi/hdmi_connector.c
index 7dedfdd..93d1551 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi_connector.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi_connector.c
@@ -127,6 +127,14 @@ static int hpd_enable(struct hdmi_connector *hdmi_connector)
}

for (i = 0; i < config->hpd_clk_cnt; i++) {
+ if (config->hpd_freq[i]) {
+ ret = clk_set_rate(hdmi->hpd_clks[i],
+ config->hpd_freq[i]);
+ if (ret)
+ dev_warn(dev->dev, "failed to set clk %s (%d)\n",
+ config->hpd_clk_names[i], ret);
+ }
+
ret = clk_prepare_enable(hdmi->hpd_clks[i]);
if (ret) {
dev_err(dev->dev, "failed to enable hpd clk: %s (%d)\n",
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation


\
 
 \ /
  Last update: 2014-06-06 17:01    [W:0.032 / U:0.364 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site