lkml.org 
[lkml]   [2014]   [Jun]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] serial: tegra: update tx_circular buffer only when TX_DMA is in progress
Date
From: Pradeep Goudagunta <pgoudagunta@nvidia.com>

When channel is require to stop transmit then update the Tx circular
buffer only when DMA based transfer is in progress. If there is no
DMA based transfer then no need to update the Tx buffer.

Signed-off-by: Pradeep Goudagunta <pgoudagunta@nvidia.com>
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
---
drivers/tty/serial/serial-tegra.c | 3 +++
1 file changed, 3 insertions(+)

diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c
index d5c2a28..117d8d1 100644
--- a/drivers/tty/serial/serial-tegra.c
+++ b/drivers/tty/serial/serial-tegra.c
@@ -482,6 +482,9 @@ static void tegra_uart_stop_tx(struct uart_port *u)
struct dma_tx_state state;
int count;

+ if (tup->tx_in_progress != TEGRA_UART_TX_DMA)
+ return;
+
dmaengine_terminate_all(tup->tx_dma_chan);
dmaengine_tx_status(tup->tx_dma_chan, tup->tx_cookie, &state);
count = tup->tx_bytes_requested - state.residue;
--
1.8.1.5


\
 
 \ /
  Last update: 2014-06-06 13:41    [W:0.026 / U:1.516 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site