Messages in this thread | | | From | Mikko Perttunen <> | Subject | [PATCH 0/9] Serial ATA support for NVIDIA Tegra124 | Date | Wed, 4 Jun 2014 14:32:30 +0300 |
| |
Hi,
This series adds support for the onboard AHCI-compliant Serial ATA controller found on Tegra124 systems-on-chip. The controller is enabled on Jetson TK1. The series depends on Peter's efuse series and Thierry's yet to be submitted XUSB pinctrl driver.
A branch containing the series is located at git://github.com/cyndis/linux.git branch ahci-rel.
Mikko Perttunen (9): of: Add NVIDIA Tegra SATA controller binding ARM: tegra: Add SATA controller to Tegra124 device tree ARM: tegra: Add SATA and SATA power to Jetson TK1 device tree clk: tegra: Enable hardware control of SATA PLL clk: tegra: Add SATA clocks to Tegra124 initialization table ARM: tegra: Export tegra_powergate_power_on ahci: Increase AHCI_MAX_CLKS to 4 ata: Add support for the Tegra124 SATA controller ARM: tegra: Add options for Tegra AHCI support to tegra_defconfig
.../devicetree/bindings/ata/tegra-sata.txt | 29 ++ arch/arm/boot/dts/tegra124-jetson-tk1.dts | 36 ++ arch/arm/boot/dts/tegra124.dtsi | 24 ++ arch/arm/configs/tegra_defconfig | 3 + arch/arm/mach-tegra/powergate.c | 1 + drivers/ata/Kconfig | 9 + drivers/ata/Makefile | 1 + drivers/ata/ahci.h | 2 +- drivers/ata/ahci_tegra.c | 386 +++++++++++++++++++++ drivers/clk/tegra/clk-pll.c | 8 + drivers/clk/tegra/clk-tegra124.c | 2 + 11 files changed, 500 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/ata/tegra-sata.txt create mode 100644 drivers/ata/ahci_tegra.c
-- 1.8.1.5
| |